Siemens Simatic ET200pro Manual - Página 18
Procurar online ou descarregar pdf Manual para Equipamento industrial Siemens Simatic ET200pro. Siemens Simatic ET200pro 29 páginas. Migration
Também para Siemens Simatic ET200pro: Manual (26 páginas), Manual de Instruções (8 páginas), Informações sobre o produto (2 páginas)
Imprimir página
Parameters/address space
4.1 Parameters
The following table shows the port parameters for the electronic module EM 4 IO-Link HF
with firmware version V1.1.
Table 4- 2
Parameters
Port configuration
Operating mode
Length of input data
(without PQI)
Length of output data
Vendor ID**
DeviceID**
Test level/data storage**
* Make sure not to exceed the maximum possible length of the input or output data for all ports.
Example:
You have selected the 32I/32O configuration. You have assigned the first port 16 bytes of input
data.
You can still assign a total of 16 bytes of input data for the remaining three ports.
** Only effective if you use the "IO-Link manual" port mode.
18
Port parameters
Value range
IO-Link autostart
•
IO-Link manual
•
DI
•
DQ
•
Disabled
•
Depending on the total length of
the module*
Depending on the total length of
the module*
Manufacturer ID of the connected
IO-Link devices
Device ID of the connected IO-
Link device
Identical type (V1.0) without
•
Backup&Restore
Type-compatible (V1.1) with-
•
out Backup&Restore
Type-compatible (V1.1) with
•
Backup&Restore
Type-compatible (V1.1) with
•
Restore
Default
IO-Link autostart
Depending on the total length of
the module*
Depending on the total length of
the module*
0
0
Type-compatible (V1.1) with
Backup&Restore
IO-Link Master (6ES7147-4JD00-0AB0)
Manual, 03/2018, A5E37967003-AB