Siemens SIMATIC NET Manual de instalação - Página 15

Procurar online ou descarregar pdf Manual de instalação para Equipamento industrial Siemens SIMATIC NET. Siemens SIMATIC NET 34 páginas. Network components bus terminal
Também para Siemens SIMATIC NET: Manual de Instruções (29 páginas), Manual de Instruções (50 páginas), Manual de Instruções (28 páginas), Manual de instruções de montagem (6 páginas), Informações sobre o produto (6 páginas), Manual de instalação (40 páginas), Manual de instalação (50 páginas), Manual de instalação (40 páginas), Manual de referência (14 páginas), Manual de instalação (48 páginas), Manual de Instruções (32 páginas)

Imprimir página
Siemens SIMATIC NET Manual de instalação
Installing the Device
2.2 Unpacking the Device
2.
3.
4.
5.
6.
7.
2.2

Unpacking the Device

When unpacking the device, do the following:
1.
2.
3.
IMPORTANT
If any item is missing or damaged, contact Siemens for assistance.
2.3

Mounting the Device

The RUGGEDCOM RP100 can be ordered with a DIN rail adapter pre-installed on the
back of the chassis. Use the adapter to latch the mount the device to a standard 35
mm (1.4 in) by 15 mm (0.6 in) IEC/EN 60715 or TS35 DIN rail.
IMPORTANT
Heat generated by the device is channeled outwards from the enclosure. As such, it
is recommended that 2.5 cm (1 in) of space be maintained on all open sides of the
device to allow for some convectional airflow.
Forced airflow is not required. However, any increase in airflow will result in a
reduction of ambient temperature and improve the long-term reliability of all
equipment mounted in the rack space.
6
Unpack and inspect the device.
For more information, refer to
Mount the device.
For more information, refer to
If installing the device outdoors, install a suitably rated lightning protector.
For more information, refer to
Connect power to the device and ground the device to safety Earth.
For more information, refer to
Connect the device to the network.
For more information, refer to
Connect a RUGGEDCOM WIN subscriber station.
For more information, refer to
Station (Page
13)".
Inspect the package for damage before opening it.
Visually inspect each item in the package for any physical damage.
Verify all items are included.
"Unpacking the Device (Page
"Mounting the Device (Page
"Installing the Device Outdoors (Page
"Connecting Power (Page
"Communication Ports (Page
"Connecting a RUGGEDCOM WIN Subscriber
Installation Manual, 01/2021, C79000-G8976-1011-05
6)".
6)".
8)".
10)".
15)".
RUGGEDCOM RP100