Siemens SIMATIC PCS 7 Manual do sistema - Página 10

Procurar online ou descarregar pdf Manual do sistema para Equipamento industrial Siemens SIMATIC PCS 7. Siemens SIMATIC PCS 7 28 páginas. Process control system, basis library readme v9.0 sp1 online
Também para Siemens SIMATIC PCS 7: Manual de Introdução (6 páginas), Manual de funções (42 páginas), Manual de Instruções (36 páginas), Ler-me (26 páginas), Manual (39 páginas)

Imprimir página
Siemens SIMATIC PCS 7 Manual do sistema
Engineering Station - What's new in PCS 7 V8.0?

2.5 APL - What's new in the Advanced Process Faceplates V8.0?

SelA16In
The signal selection can now be specified by an interconnectable input for the SelA16In block.
Motors, valves and dosers
● Outputs have been added to the following blocks to indicate if control and feedback match:
● The following blocks now allow you to specify whether bumpless switchover should be
Channel blocks
● The channel blocks support the flutter suppression function for OB82 and OB83 events of
● Detection of frozen measured values by the analog channel blocks
Extension of the gradient specification with the TimeFactor parameter
● The gradient specification for setpoints and manipulated variables has been supplemented
Other new features
● Limit inputs and control inputs of the blocks can now be interconnected.
● The blocks support instance-specific and parameter-specific setting of the operator
● In the "Out of service" mode, a feature bit can be set to determine whether active limits
● Activation of simulation mode via interconnectable inputs.
● Conditional triggering of the initial value acquisition at Intlkxx blocks.
2.5
APL - What's new in the Advanced Process Faceplates V8.0?
What's new about the block icons
Newly revised and visually-optimized V8 block icons.
● Block comments as tooltip text
● Inactive status displays of the motor and valve icons are no longer displayed.
● No display for the "On" operating mode
● Double coding of the icons for valves (rotation of the single valve icon or cross lines for a
● Motors with motor signs or arrows in different directions
10
MotL, MotRevL, MotSpdL, MotSpdCL, MotS, Vlv2WayL, VlvL, VlvAnL, VlvS and VlvMotL.
performed in automatic mode or via interconnection: MotL, MotRevL, MotSpdL, MotSpdCL,
Vlv2WayL, VlvL, VlvAnL, VlvMotL and DoseL.
the system blocks from the PCS 7 Basic Library V8.0.
with the TimeFactor parameter for the following blocks: MotSpdCL, VlvAnL, OpAnL,
PIDConL, PIDConR, PIDStepL, FmCont, FmTemp
authorization level.
should be reset or remain in effect.
two-way valve)
What's new in SIMATIC PCS 7 (V8.0)?
System Manual, 12/2011, A5E02779862-01