Siemens SIMATIC PCS 7 Manual - Página 14

Procurar online ou descarregar pdf Manual para Equipamento industrial Siemens SIMATIC PCS 7. Siemens SIMATIC PCS 7 39 páginas. Process control system, basis library readme v9.0 sp1 online
Também para Siemens SIMATIC PCS 7: Manual de Introdução (6 páginas), Manual do sistema (28 páginas), Manual de funções (42 páginas), Manual de Instruções (36 páginas), Ler-me (26 páginas)

Imprimir página

2 Configuring the hardware

2.5.2

Manual device name assignment

If your plant configuration makes it impossible to carry out an automatic

assignment of the device name, you can also do this manually. To be able to

access the drive directly, the ES and the G120X must be located in the same

physical network.

The following options are available:

•

Deploying a Service Bridge

•

Reconnecting the PROFINET interface for direct access by the ES to the drive

system

Note

This application example only considers commissioning with "Reconnecting the

PROFINET interface". For more information on deploying a Service Bridge, refer

to the application example:

"Service Bridge – Setup and Configuration"

https://support.industry.siemens.com/cs/ww/en/view/109747975

Procedure

1. Insert the network cable of the ES/single station into the fieldbus (for example

to Port 2 of the X5 interface).

2. In the SIMATIC Manager, click on "Options > Set PG/PC interface..." in the

menu.

3. Select the Ethernet network adapter that you connected with the fieldbus.

4. Select the drive system in the hardware configuration and then click in the

menu on "PLC > Ethernet > Assign Device Name".

Figure 2-11

Integration of a SINAMICS G120X frequency converter in PCS 7

Entry ID: 109793986,

V1.0,

09/2021