Siemens Simatic S7-400 Manual - Página 2
Procurar online ou descarregar pdf Manual para Equipamento industrial Siemens Simatic S7-400. Siemens Simatic S7-400 18 páginas. Block library motor starter sirius for simatic pcs 7 sirius motor starter pcs 7 library v7.1+sp2 / sirius motor starter pcs 7 library v8 migration 8.0+sp1
Também para Siemens Simatic S7-400: Manual (35 páginas), Começar a trabalhar (36 páginas)
Imprimir página
Introduction
This manual describes how to connect the Display and the External Device (target PLC).
In this manual, the connection procedure is described in the sections identified below:
1
System Configuration
This section lists the types of External
Devices and SIO that you can connect.
2
External Device Selection
Select the model (series) of the External
Device and its connection method.
3
Communication Settings
This section shows setting examples for
communicating between the Display and
the External Device.
4
Setup Items
This section describes communication
setup items on the Display.
Set the Display's communication settings
in GP Pro-EX or in off-line mode.
Operation
GP-Pro EX Device/PLC Connection Manual
Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver
"1 System Configuration" (page 3)
"2 External Device Selection" (page 6)
"3 Communication Settings" (page 7)
"4 Setup Items" (page 9)
2