Siemens SINAMICS S120 Começar a trabalhar - Página 6

Procurar online ou descarregar pdf Começar a trabalhar para Equipamento industrial Siemens SINAMICS S120. Siemens SINAMICS S120 32 páginas. Applications for cabinet modules, liquid-cooled
Também para Siemens SINAMICS S120: Manual de instruções (20 páginas), Começar a trabalhar (32 páginas), Manual (41 páginas), Breve descrição (22 páginas), Manual (43 páginas), Instruções para instalação em armários para aplicações de acionamento marítimo (28 páginas), Manual de aplicações (34 páginas), Manual de aplicações (46 páginas), Manual de Instruções (22 páginas), Manual de Instruções (21 páginas), Manual de Engenharia (30 páginas), Manual de colocação em funcionamento (20 páginas)

Preface

Safety notices

DANGER

 Commissioning is absolutely prohibited until it has been completely ensured that the

machine, in which the components described here are to be installed, is in full

compliance with the provisions of the EC Machinery Directive.

 SINAMICS devices and AC motors must only be commissioned by suitably qualified

personnel.

 The personnel must take into account the information provided in the technical customer

documentation for the product, and be familiar with and follow the specified danger and

warning notices.

 When electrical equipment and motors are operated, the electrical circuits automatically

conduct a dangerous voltage.

 When the machine or system is operated, hazardous axis movements can occur.

 All of the work carried-out on the electrical machine or system must be carried-out with it

in a no-voltage condition.

 SINAMICS devices with three-phase motors must only be connected to the power

supply via an AC-DC residual-current-operated device with selective switching once

verification has been provided that the SINAMICS device is compatible with the

residual-current-operated device in accordance with IEC 61800-5-1, Section 5.2.11.2.

WARNING

 The successful and safe operation of this equipment and motors is dependent on

correct transport, proper storage, installation and mounting as well as careful operator

control, service and maintenance.

 For special versions of the drive units and motors, information and data in the Catalogs

and quotations additionally apply.

 In addition to the danger and warning information provided in the technical customer

documentation, the applicable national, local, and plant-specific regulations and

requirements must be taken into account.

 Only protective extra-low voltages (PELV, DVC-A) that comply with EN 60204-1:2006

can be connected to the connections and terminals between 0 V and 48 V.

CAUTION

 The motors can have surface temperatures of over +80 °C.

 This is the reason that temperature-sensitive components, e.g. cables or electronic

components may neither be in contact nor be attached to the motor.

 When attaching the connecting cables, you must ensure that:

– they are not damaged

– they are not under tension

– they cannot come into contact with any rotating parts

All manuals and user guides at all-guides.com

Getting Started, 11/2009, 6SL3097-4AG00-0BP0

Getting Started