Siemens SINUMERIK 808D Manual de serviço - Página 27
Procurar online ou descarregar pdf Manual de serviço para Equipamento industrial Siemens SINUMERIK 808D. Siemens SINUMERIK 808D 48 páginas. Connecting with v60 driver
Também para Siemens SINUMERIK 808D: Manual de Instruções (34 páginas), Manual de serviço (46 páginas), Instruções (2 páginas), Manual de instalação (48 páginas)
Imprimir página
● Case 2: A commissioning archive created after the CNC lock function is activated is imported after the PPU replacement.
In this case, alarm 8062 is displayed and NC start disabled. The cause of the alarm is the new serial numbers of the new
control system hardware and new CF card. To unlock the control system, a deactivation file (.clc) appropriate for the
control system must be created by the machine manufacturer or dealer and imported into the control system.
Proceed through the following steps to create and import the deactivation file:
Service Manual
01/2017
1.
Start Access MyMachine on your computer.
2.
Select the following menu command:
3.
Click this button in the displayed dialog box to proceed to the next step.
4.
Enter the following data in the dialog box:
Serial number of the new CF card
•
Serial number of the new hardware (PPU)
•
The original assigned OEM PIN
•
For example:
5.
Click this button to save the deactivation data in the form of .clc file.
6.
Store the .clc file in a USB memory stick or a connected network drive.
7.
Open the license key dialog box through the following PPU operations:
+
8.
Press this softkey to open the file opening dialog box.
9.
Select the target directory and press this key to enter it.
→
→
→
→
27