Siemens SINUMERIK 808D Manual de serviço - Página 40
Procurar online ou descarregar pdf Manual de serviço para Equipamento industrial Siemens SINUMERIK 808D. Siemens SINUMERIK 808D 48 páginas. Connecting with v60 driver
Também para Siemens SINUMERIK 808D: Manual de Instruções (34 páginas), Manual de serviço (46 páginas), Instruções (2 páginas), Manual de instalação (48 páginas)
Imprimir página
Note
Press the following key on the MCP to cancel the alarm after eliminating the faults.
4.2.9
Alarm 700059
Alarm description
The part program cannot be executed without closing the safety door.
PLC information
PLC address: DB1600.DBX7.3
Subroutine: AUX_MCP (SBR 20)
Remedy
Check whether the safety door is closed (if using the safety door control key on
•
the MCP, check whether this key is activated).
Check the interface X102 on the back of the PPU for the following:
•
–
Whether the connection of pin 7 is loose/broken
–
Whether pin 10 is connected to 0 V properly
Check whether the door-closed limit switch works normally.
•
Note
Press the following key on the MCP to cancel the alarm after eliminating the faults.
4.3
Specific turning alarms
4.3.1
Alarm 700013
Alarm description
The chuck is not clamped. In this case, the operations of cycle start as well as the forward/reverse rotation of the spindle are
not allowed.
PLC information
PLC address: DB1600.DBX1.5
Subroutine: Lock_ unlock _T (SBR 56)
40
Service Manual
01/2017