SINUMERIK 840D sl
Functional improvements in SINUMERIK Operate 2.6 SP1 HF3 compared to 2.6 SP1 HF2
PR number
AP00940019
AP00961306
AP00973162
AP00979936
AP00988148
AP01001224
AP01009168
AP01024065
AP01048515
AP01020024
Functional improvements in SINUMERIK Operate 2.6 SP1 HF2 compared to 2.6 SP1 HF1
PR number
internal DT No.
AP00998832
AP01006165
AP00989357
AP00989815
AP00993265
AP00995067
AP01002132
AP01002772
AP01003088
AP01004826
AP01008220
AP01009876
AP01007931
AP01008933
Expanded functionality in SINUMERIK Operate 2.6 SP1 HF1 with respect to 2.6 SP1
•
Display of user icons in the large header of the machine area
User icons can be displayed in the second header line in the machine operator area. In this case, the
program name is displayed in the righthand field of the third header line. Active hold conditions hide the
display of the program name. The user icon display is controlled using PLC bits. 32 bits are available for
this purpose. The user icons can be displayed at 16 positions in the header. The icons should be
provided in the form of PNG files and should be saved in the file system depending on the particular
resolution (/user/hmi/ico/ico640, etc.).
User icons are configured in section [UserIcons] of file slmahdconfig.ini.
The following should be output
- the basis address of the PLC double-word with the bits to control the icon display
- and for each bit used, the file name of the user icon and the position at which the user icon should be
displayed.
Example:
[UserIcons]
USER_ICON_BASE=DB19.DBB80
UI_0 = icon1.png,4
UI_1 = icon2.png,6
Function improvements in SINUMERIK Operate 2.6 SP1 HF1 with respect to 2.6 SP1
PR number
internal DT No.
© Siemens AG 2010
Upgrade Instructions
SINUMERIK Operate 2.6 SP1 HF3 for PCU 50.3
AP00948387
AP00967256
AP00973691
AP00985554
AP00992451
AP01004705
AP01011116
AP01034371
AP01055528
AP01040980
Short text
OEMFrame – The header is displayed independently of the
OEMFRAME application
Easy: Crash when using the ROUND command
Measuring in JOG: Edge setting in another ZO -> HMI inoperable
Crash when copying and inserting wait marks
Exception after pressing "Display all blocks" and" syncron. view"
Exception upon storing setup data
Tapping: Thread pitch destroyed by following tool
; show icon1.png on position 4 if bit 0 (DB19.DBX83.0) is set
; show icon2.png on position 6 if bit 1 (DB19.DBX83.1) is set
Short text
AP00954677
AP00969685
AP00976957
AP00985912
AP00997089
AP01006556
AP01016807
AP01041245
AP01057357
; set the start byte of the plc double word that displays the icons
; (DB19.DBD80)
AP00958898
AP00970628
AP00977718
AP00987647
AP00999744
AP01007425
AP01017048
AP01047164
AP01059263
2010-11-26
Page 2 of 5
Imprimir página