SINUMERIK 840D sl
Notes on the simulation:
For multi-channel ShopTurn programs, the function "Spindle speed from another channel" results in a
synchronization error of the channels in simulation. As countermeasure, the spindle speed must be programmed
in each channel.
Installation
Important: If the version < 2.7 of SINUMERIK Operate for PCU 50 has already been installed, then it must first
be uninstalled under Control Panel / Add or Remove Programs. In addition, manually delete the directory
F:\hmisl\snck.
SINUMERIK Operate for PCU 50 is installed by calling the file Setup_HMIsl_......exe from the WinXP desktop of
the PCU 50. To do this, establish either a network connection to a PC using the DVD supplied or copy the
software from the DVD supplied to a USB data medium that can then be directly connected to the PCU 50.3.
The installation directory is permanently specified as f:\hmisl.
The installation version is requested during the installation:
Operation on a SINUMERIK NCU (default)
•
Operation on a SIMATIC-CPU 317 / 319
•
Functional improvements in Operate V2.7 SP2 compared to V2.7 SP1:
PR number
AP01308596
AP01276344
AP01305123
AP01198681
AP01243393
AP01224484
AP01100950
AP01214120
AP01212189
AP01228166
AP01252364
AP01304350
AP01232001
AP01132693
AP01229066
AP01194909
AP01239639
AP01240990
AP01251106
AP01253819
AP01265817
AP01278488
AP01281937
AP01238974
AP01241067
AP01257071
AP01194329
AP01222624
AP01246235
AP01278746
AP01294520
====================================================================
Compatibility
====================================================================
SINUMERIK Operate 2.7 SP2 can be combined with 840D sl NCU 7x0.2 with CNC SW 2.7 SP2
•
SINUMERIK Operate 2.7 SP2 can be combined with 840D sl NCU 7x0.3 with CNC SW 4.4 SP2
•
The help system is based on the documentation for the CNC SW 2.7.
•
The NC alarm texts are based on the CNC SW 2.7
•
STEP7 for SINUMERIK PCU 50 from V5.4 SP4 can be integrated in SINUMERIK Operate 2.7 SP1 where it
•
can run.
OEM applications which are based on the SINUMERIK Operate Programming Package 2.6 SP1 can run
•
when using generally released interfaces.
The additional languages V2.7.1 for SINUMERIK Operate can be used.
•
====================================================================
Notes
====================================================================
© Siemens AG 2012
Upgrade Instructions
SINUMERIK Operate 2.7 SP2 for PCU 50
AP01272452
AP01261065
AP00933238
AP00932460
AP01259817
AP01275210
AP01220163
AP01221865
AP01259976
AP01288110
AP01249724
AP00987008
AP01224312
AP01275957
AP01228157
AP01272240
AP01219901
AP01278907
AP01114681
AP01248804
AP01292198
AP01300463
AP01283538
AP01294550
AP01286364
AP01247310
AP01276862
AP01209360
AP01246437
AP01261307
AP01300974
AP01228682
AP01276107
AP01255860
AP01227679
AP01237261
AP01017172
AP01292479
AP01290596
AP01203286
AP01237597
AP01253536
AP01228180
AP00840691
AP01248701
AP01223489
AP01274128
AP01224468
2012-02-21
Page 2 of 3
Imprimir página