Siemens WBMPFM Manual de instruções de instalação

Procurar online ou descarregar pdf Manual de instruções de instalação para Equipamento industrial Siemens WBMPFM. Siemens WBMPFM 10 páginas. Walking-beam interlock for use with frame ng, pg

Imprimir página
s
Walking-Beam Interlock
Módulo de enclavamiento recíproco para interruptores adyacentes
Module d'interverouillage mécanique
Installation Instructions / Instructivo de Instalación
Hazardous Voltage.
Hazardous Voltage.
Will cause death or serious injury.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before
Turn off and lock out all power supplying this device before
working on this device.
working on this device.
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
turned on.
turned on.
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
NOTE - These instructions do not purport to cover all details or variations in
equipment, or to provide for every possible contingency to be met in
connection with installation, operation or maintenance. Should further information
be desired or should particular problems arise, which are not covered sufficiently
for the purchaser's purposes, the matter should be referred to the local Siemens
sales office. The contents of this instruction manual shall not become part of or
modify any prior or existing agreement, commitment or relationship. The sales
contract contains the entire obligation of Siemens. The warranty contained in
the contract between the parties is the sole warranty of Siemens. Any statements
contained herein do not create new warranties or modify the existing warranty.
Trademarks - Unless otherwise noted, all names identified by ® are registered
trademarks of Siemens AG or Siemens Industry, Inc. The remaining trademarks
in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.
MTRPB
3VL9800-3MJ01 = 24 Vdc
MTRPM
3VL9800-3ML01 = 42-48 V ac/dc
MTRPY
3VL9800-3MS01= 60 V ac/dc
MTRPN
3VL9800-3MN01 = 110-127 V ac/dc
MTRPR
3VL9800-3MQ01 = 220-250 V ac/dc
8 0 6 8 9 6 A 0 1
Tensión peligrosa.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
energizar el interruptor.
Notice:
Control circuit
interlocking recommended to
prevent unintended operation of
the motor operator in conflict with
the walking beam interlock.
Aviso:
[
El enclavamiento del
circuito de control es recomendado
para prevenir la operación
involuntaria del accionamiento de
motor en conflicto con el modulo
de enclavamiento mecánico. ]
806892_ _ _
1 / 10
U.S. Cat. No. Euro Order No.
Item:
WBMPFM 3VL98008LC01
For Use With Frame NG, PG
Para Usar Con Caja Base NG, PG
Tension dangereuse.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
Couper l'alimentation de l'appareil et barrer avant de
travailler.
travailler.
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
l'approvisionnement de pouvoir soit alimenté.
10 mm
7/16"
Cal ISO 6789
6 X M6 X 20mm
10 X
4 X M6 X 16mm
8 X M6 X 1
- 2 X
WBMPFM / 3VL98008LC01
I.L. No. 806896A01
Ø = .26"
[ Ø = 6.5 mm ]
Ø = .27"
[ Ø = 7 mm ]
10 mm