Epson 1440 Configuração rápida
Procurar online ou descarregar pdf Configuração rápida para Projetor Epson 1440. Epson 1440 4 páginas.
Imprimir página
PowerLite
Home Cinema 1440
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Video device
Connect multiple video devices and use the Source Search button on the
projector or the remote control to switch between them.
Computer
Connect one end of an HDMI cable to the projector's HDMI1 or HDMI2 port
and the other end to an HDMI port on your computer.
Note: For more information on connecting the projector to your computer or
other devices (camera, USB flash drive, etc.), see the online User's Guide.
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL
standard to the HDMI1/MHL port.
Some devices may require an adapter or may not require an MHL cable. Not all
features or functions may be supported. Check your device's documentation for
more information.
Connect audio
Built-in speaker
The projector has a built-in speaker that can play audio from a video source
(DVD player, streaming device, etc.) connected by an HDMI cable. If you do not
use an HDMI connection, you must connect your device's audio output to the
projector's audio input.
RCA video cable
(composite video)
HDMI cable
Component video
to VGA cable
™
MHL cable
Audio cable
Audio cable
External speakers
Connect your device's audio output to your home theater receiver or powered
speakers.
Note: The internal speaker is disabled when an external device is connected.
If you are using an HDMI connection to the projector, you may need to reduce
the projector speaker volume to zero (0), or make sure that the correct audio
output is selected on your device.
Home theater system
Video source
Surround sound
Powered speakers
Speakers
Video source
Note: See your home theater receiver documentation for more information
on connections.
Turn on your equipment
1
Turn on your video source or computer.
2
Plug in the projector. The
3
Open the A/V Mute slide all the way.
4
Press the
power button. The projector beeps, the Status light flashes
blue, and then stays on.
Note: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.
5
The default language of the menu system is English. To select another
language, press the Menu button on the projector or the remote
control. Select Extended and press
Select your language and press
menu system.
Video cable
Receiver
Projector
Video cable
Projector
power light on the projector turns blue.
power button twice, then
. Select Language and press
. Press the Menu button to exit the
.