Samsung 403 Series Manual do utilizador - Página 15
Procurar online ou descarregar pdf Manual do utilizador para Monitor Samsung 403 Series. Samsung 403 Series 35 páginas. 4 series; 5 series
Também para Samsung 403 Series: Manual de configuração rápida (2 páginas), Manual do utilizador (35 páginas), Manual do utilizador (49 páginas), Manual do utilizador (32 páginas), E-Manual (32 páginas)
Imprimir página
Picture Options
MENU _
_ Picture -_ Picture Options
ENTER IZ_
Color T one
: Normal
I_I
Size
: 16"9
Digital N oiseFilter
:Auto
FilmMode
: Off
III
Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be activated when the
picture mode is Movie.
Settings can be adjusted and stored for each
external device connected to an input on the TV.
III
Size: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1 : Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i/1080p)
or Component
(1080i / 1080p) signals are input.
NOTE
* After selecting Zoom1, Zoom2 or Wide Fit:
1.
Press the !_ button to select Position.
2.
Press the ENTERIZ_ button.
3.
Press the • or T button to move the picture up
or down.
4.
Press the ENTERIZ_ button.
5.
Press the I_ button to select Reset,
6.
Press the ENTER _
button to reset the picture
to its default position.
* HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
* Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
III
Digital Noise Filter (Off / Low / Medium / High /
Auto): If the broadcast signal received by your TV is
weak, you can activate the Digital Noise Filter feature
to reduce any static and ghosting that may appear on
the screen.
When the signal is weak, try other options until the
best picture is displayed,
III
HDMI Black Level (Low / Normal): Selects the black
level on the screen to adjust the screen depth,
Available only in HDMI mode (RGB signals).
III
Film Mode (Off / Auto): Sets the TV to automatically
sense and process film signals from all sources and
adjusts the picture for optimum quality,
Available in ATV, DTV(interlace), AV, COMPONENT
(480i/1080i)
and HDMI (1080i),
Picture Reset
(Reset Picture Mode / Cancel)
Resets your current picture mode to it's default settings.
III
Reset Picture Mode: Returns all picture values in the
currently selected mode to the default settings.
English 15