Samsung 5 Series E-Manual - Página 5

Imprimir página

Initial Setup

When the TV is initially powered on, a sequence of on-screen

prompts will assist in configuring basic settings. Press the

POWERP button. Setup is available only when the source is

set to TV.

1. Menu Language: Selecting a menu language

Press the ▲ or ▼ button, then press the ENTERE button.

Select the desired OSD (On Screen Display) language.

2. Use Mode: Selecting Store Demo or Home Use

Press the ▲ or ▼ button, then press the ENTERE button.

Select the Home Use mode. Store Demo mode is for retail

environments.

✎

When pressing TV controller, the function menu screen

appears. Select the MENU(m) and press it more than

5 seconds using the controller. The Store Demo mode

is set.

✎

Cancel the Store Demo by selecting Source(

pressing it more than 5 seconds.

✎

Store Demo is only for shop display. If you select it,

several functions are not able to use. Please select Home

Use when you watch at home.

3. Network Settings: Configure network settings.

✎

If you select the Skip button, you have to set

network in the Network Settings respectively.

For more information, refer to "Connecting to the

Network" in the e-Manual.

1 Connect LAN Cable or Samsung Wireless LAN Adaptor.

Select the Next button, then press the ENTERE button.

2 Complete the network settings in accordance with your

desired way.

4. Country (Depending on the country): Selecting a

country

Press the ▲ or ▼ button, then press the ENTERE button.

Select the appropriate country.

✎

After selecting the country in the country menu, some

models may proceed with an additional option to setup

the pin number.

5. Auto Tuning (Step 1): Selecting how you watch your

Let's find and store channels on your TV. Do you need to

search for channels?

• Yes, I need to.: Memorises all of the available channels

using RF cable.

• No, I don't need to.: You don't need to use Auto Tuning to

find channels.

6. Auto Tuning (Step 2): Selecting a search options

Select the desired broadcasting signal and antenna source.

Press the ▲/▼/◄/► button, then press the ENTERE

button.

When setting the antenna source to Cable, a step appears

allowing you to assign numerical values (channel frequencies)

to the channels. For more information, refer to Channel →

Auto Tuning.

✎

See e-Manual chapter "Retuning Channels > Auto

Tuning"

✎

Press the ENTERE button at any time to interrupt the

memorisation process.

7. Region Selection: Selecting your region

Press the ▲ or ▼ button, then press the ENTERE button.

Select your region. When you select the region, channel will be

reset.

✎

It is only available when you set the country to UK.

) and

8. Clock: Setting the Clock Mode

• Auto: Set the current time automatically.

• Manual: Allows you to manually set the current date and

time.

9. Time Zone (Depending on the country): Setting your

Time Zone

This step is only available when the clock mode is set to Auto.

• Auto: Set the time zone automatically.

• Manual: Set the time zone manually.

✎

If you selected Manual, you can select whether

to turn DST (Daylight Savings Time) On or Off.

(Depending on the country)

10. Setup Complete

Press the ENTERE button.

✎

The completed settings are displayed.

If You Want to Reset This Feature...

Select System - Setup (Initial Setup). Enter your 4 digit PIN

number. The default PIN number is "0-0-0-0". If you want to

change the PIN number, use the Change PIN function.

You should do Setup

although you did in shop.

✎

If you forget the PIN code, press the remote control

buttons in the following sequence in Standby mode, which

resets the PIN to "0-0-0-0":

POWER

(on).

English - 5

(MENU

→ System) again at home

MUTE

→ 8 → 2 → 4 →