Samsung 5 Series Manual do utilizador - Página 6

Imprimir página

What is HDMI?

'High Definition Multimedia interface' allows the transmission of high definition digital video data and multiple channels of

digital audio.

The HDMI / DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital

Copy Protection) coding feature installed, and supports multi - channel digital audio.

The TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable

Boxes / Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI

cable and there is no sound, connect the HDMI cable to the HDMI IN (DVI) jack and the audio cables to the DVI AUDIO

IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box /

Satellite receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not 1.3 may cause

annoying flicker or no screen display.

Supported modes for HDMI / DVI and Component.

HDMI / DVI 50Hz

HDMI / DVI 60Hz

Component

2 DVI AUDIO IN

–

DVI audio outputs for external devices.

3 PC IN [AUDIO], [PC]

–

Connect to the video and audio output jack on your PC.

4 ANT IN

–

To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor

aerial / A cable television network

5 AUDIO OUT [R-AUDIO-L]

–

Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding

audio in connectors on the Amplifier or DVD Home Theatre.

6 KENSINGTON LOCK (depending on the model)

–

The Kensington Lock (optional) is a device used to physically fix the system when used in a public place.

–

If you want to use a locking device, contact the dealer where you purchased the TV.

–

The location of the Kensington Lock may be different depending on its model.

7 H (HEADPHONE)

–

Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from

the built-in speakers will be disabled.

Using the sound function is restricted when connecting headphones to the TV.

Prolonged use of headphones at a high volume may damage your hearing.

You will not hear sound from the speakers when you connect headphones to the TV.

The headphone volume and TV volume are adjusted separately.

8 DIGITAL AUDIO OUT (OPTICAL)

–

Connects to a Digital Audio component.

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV

and adjust the volume level with the system's volume control.

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.

9 SERVICE

–

Connector for service only.

0 AV IN , [VIDEO] / [R-AUDIO-L]

–

Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

–

Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the

A/V device.

! COMPONENT IN ,

–

Connect component video cables (optional) to component connector (P

to corresponding component video out connectors on the DVD.

–

If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the

DVD to component connector (P

–

The P

, P

–

Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio

out connectors on the DVD.

@ USB

–

Connector for Media Play, etc.

[550_Aus]BN68-01895D-02Eng.indb 4

480i

480p

, P

, Y) on your set.

and Y connectors on your component devices DVD are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

576i

576p

, P

, Y) on the rear of your set and the other ends

English - 4

720p

1080i

1080p

2009-09-16

11:12:40