Samsung 5 Series Manual do utilizador - Página 23

Imprimir página

Network Setup (Ad-Hoc)

You can connect to a mobile device without an access point

through the "Samsung Wireless LAN Adapter" by using a

peer to peer network.

How to connect to new Ad-hoc

1. Follow Steps 1 through 6 in the "How to set up using

PBC (WPS)". (P. 22)

2. Choose Select a network. A list of devices/networks

appears.

3. While in the device list, press the Blue button on the

remote.

✎

The message

Ad-hoc is a direct WI-Fi

connection with cellphone or PC. The existing

network system may have limited functionality.

Do you want to change the network

connection? is displayed.

4. Input the generated Network Name (SSID) and

Security Key into the device you want to connect.

How to connect an existing Ad-hoc device

1. Follow Steps 1 through 6 in the "How to set up using

PBC (WPS)". (P. 22)

2. Choose Select a network. Then, the device list will be

displayed.

3. Select the device you want in the Device list.

4. If security key was applied, input the security key.

✎

If network doesn't operate normally, check

the Network Name (SSID) and Security Key

again. An incorrect Security Key may cause a

malfunction.

Network Setup (Manual)

If the other methods do not work, you need to enter the

Network setting values manually.

Getting the Network Connection Values

To get the Network setting values on most Windows

computers, follow these steps:

1. Right click the Network icon on the bottom right of the

screen.

2. In the pop-up menu, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support tab, click the Details button. The

Network settings are displayed.

How to set up manually

To enter the Network settings into your TV, follow these

steps:

1. Follow Steps 1 through 6 in the "How to set up using

PBC (WPS)". (P. 22)

2. Press the ▼ button to select Internet Protocol Setup,

and then press ENTERE button. Press the ▲ or ▼

button to select Manual, and then press ENTERE

button.

3. Press the ▼ button to go to the first entry field (IP

Address).

4. Use the number buttons to enter numbers.

5. When done with each field, use the ► button to move

successively to the next field. You can also use the other

arrow buttons to move up, down, and back.

6. Enter the IP Address, Subnet Mask, and Gateway

values.

7. Press the ▲ or ▼ button to go to DNS.

8. Press the ▼ button to go to the first DNS entry field.

Enter the numbers as above.

9. When done, press the ▲ button to go to Select

a Network. Select your network, and then press

ENTERE button.

10. Go to Step 4 in the "How to set up automatically" (P. 22),

and follow the directions from that point on.

If Your TV Fails to Connect to the Internet

Your TV may not be able to connect to the Internet

because your ISP has permanently registered the

MAC address (a unique identifying number) of your

PC or modem, which it then authenticates each time

you connect to the Internet as a way of preventing

unauthorized access. As your TV has a different MAC

address, your ISP can not authenticate its MAC address,

and your TV can not connect.

To resolve this problem, ask your ISP about the procedures

required to connect devices other than a PC (such as your

TV) to the Internet.

If your Internet service provider requires an ID or assword

to connect to the Internet, your TV may not be able to

connect to the Internet. If this is the case, you must enter

your ID or password when connecting to the Internet.

The internet connection may fail because of a firewall

problem. If this is the case, contact your Internet service

provider.

If you cannot connect to the Internet even after you have

followed the procedures of your Internet service provider,

please contact Samsung Electronics at 1-800-SAMSUNG.

English