Samsung 5 Series Manual do utilizador - Página 5

Imprimir página

1. Connecting to Audio Device

When the TV is initially powered on, basic settings proceed automatically.

✎

Preset: Connecting the mains and antenna.

TV Rear Panel

Power Input

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the

POWERP button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the Red button.

Selecting a language

Selecting Store Demo

or Home Use

Selecting a country

Setting the Clock

Mode

Selecting an antenna

Selecting a channel

Enjoy your TV.

If You Want to Reset This Feature...

Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0." If you want to

change the PIN number, use the Change PIN function.

You should do Plug & Play

(MENU

✎

If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets

the PIN to "0-0-0-0" :

MUTE

Connecting to an Antenna

Plug & Play (Initial Setup)

Press the ▲ or ▼ button, then press the ENTERE button.

Select the desired OSD (On Screen Display) language.

Press the ◄ or ► button, then press the ENTERE button.

Select the Home Use mode. Store Demo mode is for retail environments.

To return the unit's settings from Store Demo to Home Use (standard):

Press the volume button on the TV. When the OSD volume is displayed,

press and hold

for 5 sec.

Store Demo is only for shop display. If you select it, several functions are not

able to use. Please select Home Use when you watch at home.

Press the ▲ or ▼ button, then press the ENTERE button.

Select the appropriate country.

After selecting the country in the Country menu, some models may proceed with an additional

option to setup the pin number.

When you input the PIN number, 0-0-0-0 is not available.

Set the Clock Mode automatically or manually.

Press the ▲ or ▼ button, then press the ENTERE button.

Select Air(Digital & Analogue/Digital/Analogue), Cable(Digital & Analogue/Digital/Analogue)

or Satellite.

Press the ▲ or ▼ button, then press the ENTERE button.

Select the channel source to memorise. When setting the antenna source to Cable, a step

appears allowing you to assign numerical values (channel frequencies) to the channels. For more

information, refer to Channel → Auto Tuning.

✎

When Air or Cable is selected first: After all Air or Cable channels are stored, the step for

storing Satellite channels is displayed.

✎

When Satellite is selected first: After all Satellite channels are stored, the step for storing

Air or Cable channels is displayed.

✎

Press the ENTERE button at any time to interrupt the memorisation process.

Select the Watch TV. Press the ENTERE button.

✎

If you select the Networking Settings, set the network. For more information, refer to

"Network menu" in the e-Manual.

→ System) again at home although you did in shop.

→ 8 → 2 → 4 →

(on)

POWER

English - 5

Satellite Antenna

Cable

VHF/UHF Antenna

POWER