Samsung 5 Series Manual do utilizador - Página 11

Imprimir página

Issues

No Picture, No Video

The TV will not turn on.

The TV turns off automatically.

There is no picture/video.

Aerial (Air/Cable) Connection

The TV is not receiving all

channels.

The picture is distorted: macro

block error small block, dots,

pixelization

Others

The picture will not display in

full screen.

The remote control does not

work.

The cable/set top box remote

control doesn't turn the TV on

or off, or adjust the volume.

A "Mode Not Supported"

message appears.

There is a plastic smell from

the TV.

The TV Signal Information

is unavailable in the Self

Diagnosis Test menu.

TV is tilted to the right or left

side.

There are difficulties

assembling the stand base.

[UH5200-ME]BN68-06310U-00ENG.indb 11

Solutions and Explanations

Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

•

Make sure the wall outlet is working.

Try pressing the

POWER

button on the TV to make sure the problem is not the remote. If the TV

•

turns on, refer to "The remote control does not work" below.

Ensure the Sleep Timer is set to Off in the Time menu.

•

If your PC is connected to the TV, check your PC power settings.

Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

•

When watching TV from an aerial or cable connection, the TV will turn off after 10 ~ 15 minutes if

there is no signal.

•

Check cable connections (remove and reconnect all cables connected to the TV and external

devices).

•

Set your external device's (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the

connections to the TV input. For example, if an external device's output is HDMI, it should be

connected to an HDMI input on the TV.

•

Make sure your connected devices are powered on.

Be sure to select the TV's correct source by pressing the

•

Reboot the connected device by reconnecting the device's power cable.

•

Make sure the Aerial cable is connected securely.

•

Please try Setup (Initial setup) to add available channels to the channel list. Go to

System - Setup (Initial setup) and wait for all available channels to be stored.

Verify the Aerial is positioned correctly.

•

Compression of video contents may cause picture distortion, especially on fast moving pictures

such as sports and action movies.

•

A low signal can cause picture distortion. This is not a TV issue.

•

HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3)

contents.

•

Black bars on the top and bottom will appear during movies that have aspect ratios different from

your TV.

•

Adjust the picture size options on your external device or TV to full screen.

•

Replace the remote control batteries with the poles (+/–) in the right direction.

•

Clean the sensor's transmission window on the remote.

•

Try pointing the remote directly at the TV from 1.5 ~ 1.8m away.

Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top

•

box user manual for the SAMSUNG TV code.

•

Check the supported resolution of the TV, and adjust the external device's output resolution

accordingly.

This smell is normal and will dissipate over time.

•

This function is only available with digital channels from an Aerial / RF / Coax connection.

•

Remove the stand base from the TV and reassemble it.

•

Make sure the TV is placed on a flat surface. If you cannot remove the screws from the TV, please

use a magnetized screw driver.

English - 11

SOURCE

button on the remote control.

2014-06-25

1:22:47