U
sing the remote control
1
If this is your first time using the remote, make sure its batteries
are installed as shown (two AAA batteries).
Turn off projector
display and sound
Choose which source
to display
You can use the remote control to operate the projector. With the USB
cable, you can use the remote as a wireless mouse. For more information
on using the remote control, see your User's Guide.
W
here to get help
Telephone Support
Services
To use the Epson PrivateLine
®
Support service, call (800) 637-7661 and enter
the PIN on the Epson PrivateLine Support card included with your projector.
This service is available 6
to 6
AM
Friday, for the duration of your warranty period. You may also speak with
a projector support specialist by dialing one of these numbers:
U.S.:
(562) 276-4394, 6
AM
Monday through Friday
Canada: (905) 709-3839, 6
AM
Monday through Friday
Toll or long distance charges may apply.
Internet
Support
Visit Epson's support website at epson.com/support and select your
product for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.
Visit http://www.presentersonline.com to access tips, templates, and
training for developing successful presentations.
Register today to get product updates, special promotions, and
customer-only offers. You can use the registration card or CD included
with your projector, or register online at www.epson.com/webreg.
Epson is a registered trademark and Exceed Your Vision is a trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
© 2006 Epson America, Inc. 12/06
Printed in XXXXXX
Turn projector on and off
Zoom in on part of
the projected image
Navigate projector menus
Control projector volume
, Pacific Time, Monday through
PM
to 6
, Pacific Time,
PM
to 6
, Pacific Time,
PM
Quick Setup
PowerLite 1810p
T
roubleshooting
If you see a blank screen...
If you see a blank screen or the No signal message after turning on
your notebook, check the following:
M ake sure the Power light on the projector is green and not flashing,
and the A/V Mute slide (lens cover) is open.
P ress the Source Search button on the projector or the Search
button on the remote control to select the computer as the
image source.
I f you're using a Windows
®
notebook, press the function key on your
keyboard that lets you display on an external monitor. It may be
labeled CRT/LCD or have an icon such as
hold down the Fn key while pressing it. Allow a few seconds for
the projector to sync up after changing the setting.
If the projector and notebook
don't display the same image...
If your image displays either on the projector or notebook, but not on
both, check the following:
Windows
Try using the CRT/LCD or
key as described above. On most systems,
this key lets you toggle between the LCD screen and the projector,
or display on both at the same time.
If that doesn't work, check your monitor settings to make sure both the
LCD screen and the external monitor port are enabled.
1.
F rom the Windows Control Panel, open the Display utility. In
Windows Vista,
right-click on the desktop and select Personalize,
T M
then select Display Settings.
2.
I n the Display Properties dialog box, click
the Settings tab, then click Advanced.
In Windows Vista, click Advanced Settings.
3.
T he method for adjusting the setting varies;
you may have to click a Monitor tab, then
make sure the external Monitor port is set
as your primary display and/or enabled.
See your notebook's manual or online help
for details.
Macintosh
®
OS X
1.
From the Apple
menu, select System
®
Preferences, then select Displays.
2.
S elect the VGA Display or Color LCD
dialog box.
3.
C lick the Arrangement (or Arrange)
tab and click Mirror Displays.
. You may have to
CPD-23262
Imprimir página