Samsung 5 Series Manual do utilizador - Página 4

Imprimir página

Channel Menu

defaults.

❑ Memorizing Channels

If you are not using a cable box or satellite box, when you ﬁrst set up

your TV using Plug & Play, the TV memorized the channels that were

available over the air or through your cable system and added them to

the Channel List. The Antenna and Auto program functions described

below let you re-run the channel memorization function without having to

re-run the Plug & Play procedure.

Antenna (Switch to Cable / Switch to Air t)

Before your television can memorize the available channels, you must

select your TV's signal source, Air (using an antenna) or Cable. Select

Menu > Channel > Antenna > Air or Cable. After you have selected the

signal source, go on to the Auto Program function.

✎

Selecting the signal source using the Antenna function also

determines the signal source the TV is tuned to. For example, if you

receive your TV signal over the air, and you select Cable, you will

see only snow. You must select Air to see a picture.

Auto Program

The Auto Program function memorizes all channels that are available

over the air or through your cable system and adds them to the Channel

List.

✎

If your TV is connected to a cable box or satellite box, you do not

need to run Auto Program. You will use the tuner in the box, not the

tuner in the TV, to select channels.

To start Auto Program, follow these steps:

1. Push MENUm → Channel → Auto Program → ENTERE on your

remote. The Antenna Source screen appears.

2. On the Antenna Source screen, select the source of your TV signal.

Air

If your TV is connected to an antenna choose Air, and then press

ENTERE. The TV will automatically start memorizing channels.

Cable

If your TV is connected to a cable outlet, choose Cable, and then

press ENTERE. Go to Step 3.

Auto

If you choose Auto, and then press ENTERE, the TV will

automatically select the correct Antenna source. Go to Step 3.

3. On the Cable Type screen, use the ◄/►/▲/▼ buttons to select the

type of digital and analog cable systems you have: STD, HRC, or

IRC. Most systems are STD (Standard). When done, select Start,

and then press ENTERE. The TV will start memorizing channels.

✎

Channel memorization can take up to 45 minutes, depending on

your cable system.

✎

Memorized channels are added to the Added Channels list. These

are the channels you will see when you use the Channel buttons on

your remote.

Clear Scrambled Channel

This function ﬁlters out scrambled channels after Auto Program is

completed. This process may take 20~30 minutes.

✎

Press the ENTERE button to stop Clear Scrambled Channel.

✎

This function is only available in Cable mode.

❑ Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels you've

scheduled for viewing. Add or delete Favorite channels, add or delete

channels from the Added Channels list, schedule channels or programs

for viewing. Select a channel to watch on the All Channels, Added

Channels, or Favorite screen by pressing the ▲/▼ buttons, and then

pressing the ENTERE button.

✎

If you use a cable box or satellite box, you cannot use the Channel

List functions.

Air

6-1

♥ TV #6

7-1

♥ TV #7

Air

9-1

♥ TV #9

Air

10-1

♥ TV #10

11-1

♥ TV #11

Air

Zoom

Select T Tools ► Next Program

Channel List Screens icons are listed on the left side. Select an

icon using the ▲/▼ buttons to view each list.

All Channels: Shows all currently available channels including

■

those you deleted from the Added Channels list.

Added Channels: Shows all Added Channels. These are the

■

channels that appear when you press the

Favorite: Shows all favorite channels.

■

Programmed: Shows all channels and programs currently

■

scheduled using Timer Viewing.

✎

Remote control buttons active on the Channel List screen.

Green (Zoom): Enlarges or shrinks a channel number.

Yellow (Select): Move the cursor to a channel. Press the Yellow

button to select the channel. A c mark appears. Repeat to select

additional channels. Then, open the Tools menu and apply a

function to the channels you selected.

T (Tools): Displays the Channel List Tools menu. (The Tools

menus may differ depending on the situation.)

► (Next Program): Displays next programs.

Display Icons Used in the Channel List Screens

Icons

A selected channel.

A Favorite channel.

A reserved program.

)

A program currently being broadcast.

(

❑ The Channel List Tools Menu

Channel List → t

The Channel List Tools menu contains most of the functions you can use

on the All Channel, Added Channels, and Favorite List screens. To

view, select a list screen, select a channel, and then press the

button.

■ Add / Delete: Delete a channel from or add a channel to the Added

Channels list.

To delete channels from the Added Channels list, follow these steps:

1. Select one or more channels in the Added Channels list using the

▲/▼ buttons and the Yellow (Select) button on your remote.

2. Press the

TOOLS

button on your remote. The Tools menu appears.

3. Select Delete in the Tools menu, and then press the ENTERE

button.

Meaning

TOOLS