Samsung 5003 Series Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Monitor Samsung 5003 Series. Samsung 5003 Series 2 páginas. 5100 series 5
Também para Samsung 5003 Series: Manual do utilizador (2 páginas), Manual do utilizador (35 páginas), Manual do utilizador (2 páginas), Manual do utilizador (49 páginas), Manual do utilizador (2 páginas), Manual do utilizador (2 páginas), Manual do utilizador (2 páginas), Manual do utilizador (2 páginas), Manual do utilizador (2 páginas), Manual do utilizador (2 páginas), Manual do utilizador (2 páginas)
Imprimir página
x
PTP devices are not supported.
y Supported Subtitle Formats
x
If an over-power warning message is displayed while you are
-
External
connecting or using a USB device, the device may not be
Name
recognized or may malfunction.
x
If the TV has no input during the time period set in Auto
MPEG-4 timed text
Protection Time, the Screensaver will run.
SAMI
x
The power-saving mode of some external hard disk drives may
SubRip
be released automatically when your connect them to the TV.
x
SubViewer
If you use a USB extension cable, the TV may not recognize the
USB device or may not be able to read the files on the device.
Micro DVD
x
If a USB device connected to the TV is not recognized, the list of
SubStation Alpha
files on the device is corrupted, or a file in the list is not played,
Advanced SubStation Alpha
connect the USB device to a PC, format the device, and check
-
the connection.
Internal
x
If a file you deleted from the PC is still found when you run Media
Name
Container
Play, use the "Empty the Recycle Bin" function on the PC to
permanently delete the file.
Xsub
AVI
x
Photos only supports the sequential jpeg format.
SubStation Alpha
MKV
x
The Videos option does not support the scene search and
Advanced SubStation Alpha
MKV
thumbnail functions.
SubRip
MKV
x
If the number of files and folders saved on a USB storage device is
MPEG-4 Timed text
MP4
over approximately 4000, the files and folders may not appear and
some folders may not open.
y Supported Video Formats
x
The maximum displayed number of files, including sub folders, in
File
Frame
one folder of USB storage device is 2000.
Container
Video Codec
Resolution
Extension
rate(fps)
x
The media may not be playing smoothly when using the device
DivX3.11 / DivX4
1920x1080
6~30
lower than USB 2.0.
/ DivX5 / DivX6
H264
1920x1080
6~30
Videos
*.mp4
MP4
VC-1
1920x1080
6~30
MJPEG
640x480
6~30
►
Movie 01.avi
00:04:03 / 00:07:38
1/1
DivX3.11 / DivX4
1920x1080
6~30
/ DivX5 / DivX6
"*.avi
"AVI
MPEG 1/2/4
1920x1080
6~30
*.mkv"
MKV"
H264
1920x1080
6~30
MJPEG
640x480
6~30
DivX3.11 / DivX4
1920x1080
6~30
/ DivX5 / DivX6
"*.asf
ASF
*.wmv"
MPEG 1/2/4
1920x1080
6~30
E Pause L Jump T Tools R Return
H.264
1920x1080
6~30
SUM
"*.ts
MPEG2 -TS
1920x1080
6~30
1. In the Media Play menu, press the ◄ or ► button to select
*.trp
TS
Videos, and then press the ENTERE button.
*.tp
H. 264
1920x1080
6~30
2. Press the ◄/►/▲/▼ buttons to select a video in the file list.
"*.dat
MPEG1
1920x1080
6~30
*.mpg
PS
MPEG2
1920x1080
6~30
3. Press the ENTERE button or � (Play) button.
*.mpeg
*.vob"
H. 264
1920x1080
6~30
-
The file name is displayed on the top of the screen with the
MPEG 1/2/4
1920x1080
6~30
playing time.
*.3gp
3GPP
H.264
1920x1080
6~30
-
If video time information is unknown, playing time and the
H.264
1920x1080
6~30
flash
progress bar are not displayed.
*.flv
formats
Sorenson H.263
1920x1080
6~30
-
During video playback, you can search using the ◄ and
Other Restrictions
► buttons.
y Video content will not play, or not play correctly, if there is an
✎
In this mode, you can play movie clips contained in a game,
error in the content or the container.
but you cannot play the game itself.
y Sound or video may not work if the contents have a standard
bit rate/ frame rate above the compatible Frame/sec listed in the
Supported Video Formats table.
y If the Index Table erroneous, the Seek (Jump) function is not
supported.
y The menu may take longer to appear if the video's bit rate
exceeds 10Mbps.
y Video content can not be played if there are many contents in
one file.
- 9 -
Trouble Powering On
Before you turn the TV on, find the red light on the right or left bottom of your TV. Press the power on button
on the TV or remote and the light should blink about 5 times before the TV turns on.
If you find that you are having trouble powering on your Samsung television, there are a number of things to check it
before making a call to the service department.
y If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you
press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your
keyboard or move the mouse. Then try turning your TV on.
If you're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a
signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite
box remote control. If the screen displays the guide or info data, the problem is caused by the box.
Stand Assembly
• If you have any trouble assembling the stand, refer to "Install the Stand" in the Start Up or Stand Installation Guide.
Cannot find a channel
• Re-run Plug & Play or run Auto Program. (go to MENU - Channel - Auto Program)
Poor Picture
First, perform the Picture Test and to see if your TV is displaying the test image properly.
Go to MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as
• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to
it did in the store.
deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD channels from the channel line up.
• Air/Cable Antenna connection: Try HD channels after running Auto Program.
✎
Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up
scaled SD content is low.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
The picture is distorted: macroblock
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
error, small block, dots, pixelization.
sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
Color is wrong or missing.
• If you're using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness.
• Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
• Adjust the Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )
• Try resetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of
• If the picture size is set to Screen Fit, change it to 16:9.
the screen.
• Change the cable/satellite box resolution.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input 1
on the TV.
When changing channels, the picture
• If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It
freezes or is distorted or delayed.
may take up to 20 minutes)
• Set the output resolution of the cable box to 1080i or 720p.
Sound Problems
Perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may be caused by the source or signal.
There is no sound or the sound is too
• Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.
low at maximum volume.
The picture is good, but there is no
• If you are using an external device, check the device's audio output option Ex. you may need to change your
sound.
cable box's audio option to HDMI if the box is connected to your TV using an HDMI cable.
• Reboot the connected device by reconnecting the device's power cable.
The speakers are making an
• Check the cable connections. Make sure a video cable is not connected to an audio input.
inappropriate noise.
• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
• Perform the Sound Test as explained above.
No Picture, No Video
The TV will not turn on.
• Make sure the AC power cord is securely plugged into the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the
POWER
button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to 'Remote control does not work' below.
The TV turns off automatically.
• Ensure the Sleep Timer is set to Off in the Time menu.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged securely into the wall outlet and the TV.
• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes
if there is no signal.
- 13 -
[UH4000-ZA]BN68-05829K-01ENG.indb 2
Photos
Video Decoder
Supports up to H.264, Level 4.1
Normal
Image1024.jpg
File extension
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are
.ttxt
not supported.
.smi
MPEG4 SP, ASP :
.srt
– Below 1280 x 720: 60 frame max
.sub
– Above 1280 x 720: 30 frame max
.sub or .txt
H.263 is not supported.
.ssa
.ass
GMC is not support.
E Pause L Previous/Next T Tools R Return
1. In the Media Play menu, press the ◄ or ► button to select
SUM
Audio Decoder
Photos, then press the ENTERE button.
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
Format
2. Press the ◄/►/▲/▼ buttons to select a photo in the file list.
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR
Picture Format
3. Press the ENTERE button or � (Play) button.
mode of WMA Pro is not supported)
Text Format
✎
NOTE
Text Format
WMA Lossless is not supported.
x
While a photo list is displayed, press the � (Play) / ENTERE
Text Format
Music
button on the remote control to start a slide show.
Text Format
x
All files in the file list section will be displayed in the slide show.
x
During the slide show, files are displayed in order.
Playlist
3/15
x
During the slide show, you can adjust the slide show speed
Bit
Audio
I Love you
I Love You
Jhon
Jhon
rate(Mbps)
Codec
using (π) (REW) or (µ) (FF) button.
Music 1
1st Album
x
No Singer
You can move to other files using ◄ or ► button.
Pop
20Mbps
Music 2
2010
4.2MB
No Singer
✎
Media Play can play Music files automatically during a Slide
MP3 /
Music 3
20Mbps
ADPCM /
No Singer
Show if Background Music is set to On.
Music 4
AAC
01:10 / 04:02
20Mbps
No Singer
✎
You cannot change the Mode in Background Music until the
Music 5
10Mbps
No Singer
Background Music file has finished loading.
20Mbps
E Pause L Jump T Tools R Return
SUM
y Supported Photo Formats
MP3 / AC3
/ LPCM /
20Mbps
1. In the Media Play menu, press the ◄ or ► button to select
ADPCM /
Image
20Mbps
DTS
Music, and then press the ENTERE button.
10Mbps
2. Press the ◄/►/▲/▼ buttons to select the desired Music in the
JPEG
20Mbps
MP3 / AC3
file list.
/ LPCM /
ADPCM
20Mbps
Other Restrictions
/ WMA /
3. Press the ENTERE button or � (Play) button.
20Mbps
WMA Pro
✎
During music playback, you can search using the ◄ and
y CMYK, YCCK Color space JPEG are not supported.
20Mbps
AC3 / AAC
► button.
/ MP3 /
Playing Multiple Files
20Mbps
DD+
✎
� (REW) and μ (FF) buttons do not function during
20Mbps
AC3 /
play.
■ Playing selected video/music/photo files
MPEG /
20Mbps
✎
Media Play only displays files with MP3 and PCM file
LPCM /
1. On the File List screen, highlight a file, and then press the Yellow
20Mbps
AAC
extension. Other file extensions are not displayed, even if they
button on your remote.
20Mbps
are saved on the same USB device.
MP3
2. Repeat Step 1 to select multiple files.
20Mbps
✎
If the sound is abnormal when playing MP3 files, adjust the
✎
20Mbps
NOTE
Equalizer in the Sound menu. (An over-modulated MP3 file
MP3
20Mbps
x
A c mark appears to the left of the selected files.
may cause a sound problem.)
x
To cancel a selection, press the Yellow button again.
x
To deselect all selected files, press the
Deselect All, and then the ENTERE button.
3. Press the
TOOLS
then press the ENTERE button.
■ Playing a video/music/photo folder
1. With the folders on your USB device displayed, use the
◄/►/▲/▼ buttons to highlight a folder.
2. Press the
TOOLS
ENTERE
button
- 10 -
There is no picture/video.
• Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
• Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV
input. For example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the correct input source by pressing the
• Reboot the connected device by reconnecting the device's power cable.
RF (Cable/Antenna) Connection
The TV is not receiving all channels.
• Make sure the coaxial cable is connected securely.
• Run Auto Program to add available channels to the channel list.
go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set
in the menu. There are 3 options. (STD, HRC and IRC)
• Verify the antenna is positioned correctly.
No Caption on digital channels.
• Check the Caption Setup menu. Try changing Caption Mode Service 1 to CC1.
• Some channels may not have caption data.
The picture is distorted: macroblock,
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
error, small block, dots, pixelization.
sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
Others
Purple/green rolling horizontal bars and
• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-
buzzing noise from the TV speakers with
top-box has a grounding issue. Replace the Component video cables with an HDMI connection.
Component cable connection.
The picture will not display in full screen.
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
• Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on the
TV.
• Adjust the picture size option on your external device or change the TV to full screen.
The remote control does not work.
• Replace the remote control's batteries. Make sure you insert them with the polarity (+/–) correct .
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for
does not turn the TV on or off, or adjust
the SAMSUNG TV code.
the volume.
A "Mode Not Supported" message
• Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to
appears.
resolution settings in this manual.
Caption on the TV menu is greyed out.
• You cannot select Caption in the TV menu when watching content from a device connected via HDMI or
Component.
• Caption must be activated on the external device.
There is a plastic smell from the TV.
• This smell is normal and will dissipate in a few days.
TV Signal Strength is unavailable in the
• This function is only available for digital channels received through an Antenna / RF/Coax connection.
Self Diagnosis Test menu.
TV is tilted to the right or left side.
• Remove the stand base from the TV and reassemble it.
The Channel menu is grey out
• The Channel menu is only available when you select the TV source.
(unavailable).
Your settings are lost after 5 minutes or
• If TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. Please change from
every time the TV is turned off.
Store Demo mode to Home Use mode using the Plug & Play procedure. Press the
TV mode, go to MENU → Setup → Plug & Play → ENTERE.
You have intermittent loss of audio or
• Check the cable connections and reconnect them.
video.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree
connectors.
You see small particles when you look
• This is part of the product's design and is not a defect.
closely at the edge of the frame of
•
the TV.
POP (TV's internal banner ad) appears
• Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
on the screen.
✎
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may
be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
✎
Watch these troubleshooting on video at www.samsung.com/spsn.
✎
Some functions and pictures shown in this manual are available on specific models only.
✎
You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com
→ Support → Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick,
insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu.
- 14-
Media Play - Additional Functions
■ Videos/Music/Photos Play Option menus
1024x768
2010/2/1
3/15
When playing a file, press the
TOOLS
button.
Category
Operation
Videos
Music
You can select another video file
Title
c
to play directly.
Repeat Mode You can play movie and music
c
c
files repeatedly.
You can adjust the picture size to
Picture Size
c
your preference.
Picture Mode You can adjust the picture setting.
c
Sound Mode You can adjust the sound setting.
c
c
You can play the video with
Subtitle
Subtitles. This function only works
c
Setting
if the subtitles have the same file
name as the video.
Audio Format You can select the digital audio
c
output format.
You can change the audio
Audio
language if the video has more
c
Language
than one language.
Stop Slide
Show /
You can start or stop a Slide
Start Slide
Show.
Show
Slide Show
You can select the slide show
Speed
speed during the slide show.
You can set and select
Background
background music when
Music
watching a Slide Show.
You can zoom into images in full
Photo
Resolution
Zoom
screen mode.
Base-line
15360 x 8704
You can rotate images in full
Rotate
screen mode.
Progressive
1024 x 768
You can see detailed information
Information
c
c
about the played file.
Other Information
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on
the wall.
For detailed information about installing the wall mount, see
the instructions provided with the wall mount items. Contact a
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the wall
mount on your own.
TOOLS
button, select
Wall Mount Kit Specifications (VESA)
button, select Play Selected Contents, and
✎
The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your
nearest dealer. If you install the TV on a ceiling or slanted wall, it
may fall and result in severe personal injury.
button, select Play Folder, and then press the
.
Storage and Maintenance
✎
If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching
the TV.
✎
SOURCE
button on the remote control.
The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using
a soft cloth to prevent scratches.
Do not spray water directly onto the
product. Any liquid that goes into the
product may cause a failure, fire, or
electric shock.
License
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit
divx. com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased
DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your
device setup menu. Go to vod.divx.com for more information on how to complete your registration.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are
used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS,
the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark
of DTS, Inc. © DTS, Inc. All Rights Reserved.
Manufactured under a license from U.S. Patent No's: 6,285,767, 8,027,477, 5,319,713, 5,333,201,
5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474,
7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are registered trademarks &
DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License
Notice is written only English.
To send inquiries and requests for questions regarding open sources, contact Samsung via Email ([email protected]).
■ This product uses some software programs which are distributed under the Independent JPEG Group.
SOURCE
button to select
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1995-2008 International Business Machines Corporation and others All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to
whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the
above copyright notice(s) and this permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT
HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY
DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization of the copyright holder.
All trademarks and registered trademarks mentioned herein are the property of their respective owners.
✎
NOTE
Kensington Lock
x
Standard dimensions for wall mount kits are shown in the table
The Kensington Lock is not supplied by Samsung. It is a device
below.
used to physically fix the system when using it in a public place.
x
When purchasing our wall mount kit, a detailed installation
Refer to the manual provided with the Kensington Lock for additional
manual and all parts necessary for assembly are provided.
information on proper use.
Photos
x
Do not use screws that do not comply with the VESA standard
✎
Please find a "K" icon on the rear of the TV. The Kensington
screw specifications.
slot is beside the "K" icon.
x
Do not use screws that are longer than the standard dimension
or do not comply with the VESA standard screw specifications.
✎
The position and color may differ depending on the model.
Screws that are too long may cause damage to the inside of the
TV set.
Assembling the Cable manager
x
For wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
c
depending on the wall mount specifications.
c
x
Do not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
x
Samsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
x
Do not mount the TV at more than a 15 degree tilt.
x
Always have two people mount the TV on a wall.
Product
TV size in
VESA screw hole specs
Standard
Quantity
Family
inches
(A * B) in millimeters
Screw
c
LED-TV
24
75 X 75
M4
4
c
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply, visit
Do not install your Wall Mount Kit while
c
samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
your TV is turned on. It may result in
personal injury due to electric shock.
c
Problem
Flickering and Dimming
c
Securing the TV to the Wall
c
Caution: Pulling, pushing, or climbing onto the TV
may cause the TV to fall. In particular, ensure that your
Component Connections /
children do not hang over or destabilize the TV; doing
Screen Color
so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided
on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To prevent the TV from falling
✎
Since the necessary brackets, screws, and string or cable are
not supplied, please purchase these separately.
Screen Brightness
1. Insert the screws into the wall brackets and firmly fasten them to
the wall. Make sure the screws are firmly fixed to the wall.
✎
We strongly recommend you drive the screws into a stud.
2. Using screws, insert the screws through the TV brackets, and
Unwanted Powering off
then fasten the screws to the top VESA screw holes on the back
of the TV.
3. Connect the brackets on the TV and the brackets on the wall
with a strong string or cable, and then tie the string or cable
tightly to the brackets.
✎
Verify all connections are properly secured. Periodically check
the connections for any sign of fatigue or failure. If you have
any doubt about the security of your connections, contact a
professional installer.
✎
Install the TV close to the wall so that it does not fall.
✎
Connect the string or cable so that the brackets on the wall
are at the same height or lower than the brackets on the TV.
Untie the string or cable before moving the TV.
✎
To purchase a TV Holder kit, contact Samsung customer
care.
- 11 -
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Clean the product with a soft cloth
dampened with in a small amount of
Model Name
water. Do not use a flammable liquid
(e.g. benzene, thinners) or a cleaning
Display Resolution
agent.
Screen Size
(Diagonal)
Sound
Output
Dimensions (W x H x D)
Body
With stand
Weight
Without Stand
With Stand
✎
Design and specifications are subject to change without prior notice.
✎
This device is a Class B digital apparatus.
✎
For information about the power required and more about power consumption, refer to the label attached to the product.
✎
Typical power consumption is measured according to Energy Star Program requirements for televisions.
✎
Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.
samsung.com/recyclingdirect or call, (877) 278-0799.
■ JACK PANEL DETAIL / REAR VIEW
Model name
1
UN24H4000AF
2.9
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing
installation of your TV. Not responsible for typographical or printed errors.
© 2014 Samsung Electronics America, Inc
- 15 -
Display Modes (HDMI/DVI Input)
Optimal resolution: 1366 x 768@60Hz
Horizontal
Vertical
Pixel Clock
Sync
1366 x
Mode
Resolution
Frequency
Frequency
Frequency
Polarity
768
(KHz)
(Hz)
(MHz)
(H / V)
640 x 350
31.469
70.086
25.175
+/-
c
IBM
720 x 400
31.469
70.087
28.322
-/+
c
640 x 480
35.000
66.667
30.240
-/-
c
MAC
832 x 624
49.726
74.551
57.284
-/-
c
1152 x 870
68.681
75.062
100.000
-/-
640 x 480
31.469
59.940
25.175
-/-
c
640 x 480
37.861
72.809
31.500
-/-
c
640 x 480
37.500
75.000
31.500
-/-
c
800 x 600
37.879
60.317
40.000
+/+
c
800 x 600
48.077
72.188
50.000
+/+
c
800 x 600
46.875
75.000
49.500
+/+
c
1024 x 768
48.363
60.004
65.000
-/-
c
1024 x 768
56.476
70.069
75.000
-/-
c
1024 x 768
60.023
75.029
78.750
+/+
c
VESA DMT
1152 x 864
67.500
75.000
108.000
+/+
1280 x 720
45.000
60.000
74.250
+/+
c
1280 x 800
49.702
59.810
83.500
-/+
1280 x 1024
63.981
60.020
108.000
+/+
1280 x 1024
79.976
75.025
135.000
+/+
1366 x 768
47.712
59.790
85.500
+/+
c
1440 x 900
55.935
59.887
106.500
-/+
1600 x 900RB
60.000
60.000
108.000
+/+
1680 x 1050
65.290
59.954
146.250
-/+
1920 x 1080
67.500
60.000
148.500
+/+
Possible Solution
If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient
features like the Eco Sensor or the Energy Saving feature. Follow the steps below with your remote to turn these
features off or on.
y Energy saving : MENU → Setup → Eco Solution → Energy Saving →Select Settings
If you find that the color on your Samsung television's screen is not correct or black and white, first run a Self
Diagnosis Test on the TV to make sure there are no device issues.
y Self Diagnosis : MENU → Support → Self Diagnosis → Picture Test
y If the test is ok, try making sure ;
y Your connections are all consistent. For example, if you've used the AV In jack on your TV, make sure you have
used the AV Out jack on your video source.
y Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled
Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the
video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.
If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings
you should check before calling for a repair.
y Backlight, Contrast, Brightness, Sharpness, Color, Tint (G/R) and so on. Go to "Picture" in the Menu, and
then try adjusting these options.
If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco
friendly No Signal Power Off feature.
First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on
knowing that it will turn off after a certain period of time and not waste energy.
y Sleep Timer : MENU → Setup → Time → Sleep Timer
If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.
y No Signal Power Off : MENU → Setup → Eco Solution → No Signal Power
y Auto Power Off : MENU → Setup → Eco Solution → Auto Power Off
- 12 -
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C )
5% to 95%, non-condensing
UN24H4000AF
1366 x 768
24" Class
(23.6" measured diagonally)
3W x 2
22.1 x 13.7 x 1.8 inches
(561.8 x 349.1 x 47.9 (mm))
22.1 x 15.1 x 6.4 inches
(561.8 x 384.2 x 163.8 (mm))
8.2 lbs (3.9 kg)
9.0 lbs (4.1 kg)
4
3
1
5
2
8
6
7
(Unit: inches)
2
3
4
5
6
7
8
2.9
9.5
3.8
4.8
3.3
3.5
11.6
- 16 -
2014-06-25
3:04:52