Cisco 3600 Series Nota de configuração - Página 13

Procurar online ou descarregar pdf Nota de configuração para Telefone IP Cisco 3600 Series. Cisco 3600 Series 23 páginas. Memory upgrade
Também para Cisco 3600 Series: Visão geral do produto (10 páginas), Instruções de atualização (30 páginas), Manual do Proprietário (17 páginas), Nota de aplicação (41 páginas), Manual de configuração (36 páginas), Manual do utilizador (25 páginas), Apêndice (15 páginas), Manual do utilizador (7 páginas), Manual (5 páginas), Nota de configuração (18 páginas), Nota de configuração (25 páginas)

Cisco 3600 Series Nota de configuração
Figure 11
Removing Cisco 3640 Power Connector
Find the two small two-pin connectors used to power the fans. Grasp the two halves of
Step 3
each connector firmly and pull them apart. (See Figure 8 and Figure 9.)
If cable tie-wraps on the harness interfere with removing the connectors, cut the
Note
tie-wraps, being careful not to cut into the power cables.
Step 4
The Cisco 3620 power supply is held in the chassis by one external mounting screw at the
rear of the router. (See Figure 12.) The Cisco 3640 power supply is held by two mounting
screws. (See Figure 13.) Remove the screw or screws and set them aside.
Slide the power supply forward slightly in the chassis. This disengages the hooks built
Step 5
into the chassis that help secure the power supply. The Cisco 3620 router has two hooks.
(See Figure 14.) The Cisco 3640 router has one hook. (See Figure 15.)
Step 6
Lift the power supply out of the chassis.
Cisco 3600 Series Power Supply Configuration Note
Removing the Power Supply
13