Siemens 2AO U HF Manual - Página 10
Procurar online ou descarregar pdf Manual para Unidade de controlo Siemens 2AO U HF. Siemens 2AO U HF 22 páginas. Analog electronic module simatic et 200s distributed i/o
Imprimir páginaProperties
1.1 2AO U HF analog electronic module (6ES7135-4LB02-0AB0)
Crosstalk between the outputs
Operational limit
Intrinsic error limit
Temperature error (with reference to the output
range)
Linearity error (with reference to the output range) ± 0,01 %
Repeatability (in steady state at 25°C with
reference to output range)
Output range (rated value)
Load impedance (in the rated range of the output)
•
Voltage output
•
•
Destruction limit against voltages/currents applied
from outside
•
Connection of actuators
•
I&M functions
The I&M data can be read from the module using interface modules with the following order
numbers or firmware/product versions (or higher):
Interface module
IM151-1 HIGH FEATURE
IM151-3 PN
IM151-3 PN HIGH FEATURE
IM151-3 PN FO
Note
Using the module after an IM151-7 CPU
If the module is positioned after an IM151-7 CPU, it outputs the last values before a RUN-
STOP transition, provided no values were output by the user program after the STOP-RUN
transition.
Take this into account when programming the control function startup (OB100 or OB1).
10
At voltage outputs
Capacitive load
Short circuit protection
Short circuit voltage
Voltage at the outputs to M
Voltage output
2-wire connection
4-wire connection
Suppression of interference, limits of error
Min. -60 dB
± 0,1 %
± 0,05 %
±0.003%/K
± 0,01 %
Transmitter selection data
±5 V
±10 V
1 V to 5 V
Min. 1.0 kΩ
Max. 0.5 µF
yes
approx. 25 mA
Max. 15 V continuous; 75 V for max. 1 ms
ANA
(sampling ratio 1:20)
Possible, without compensation of the line
resistances
Possible
Order number
6ES7151-1BA01-0AB0
6ES7151-3AA20-0AB0
6ES7151-3AA20-0AB0
6ES7151-3BB21-0AB0
2AO U HF analog electronic module (6ES7135-4LB02-0AB0)
Firmware version
Product version
V2.0
V4.0
V4.0
V4.0
Manual, 04/2007, A5E01076940-01
02
01
01
01