Epson 455 Manual de operação - Página 5

Procurar online ou descarregar pdf Manual de operação para Projetor Epson 455. Epson 455 11 páginas.

The Epson BrightLink 450/455 models are nearly identical in design and function. The following

guide provides instruction for the basic operations as well as troubleshooting measures of these devices.

Connecting to a computer/document camera

•

Projectors are connected to classroom computer via VGA and USB cables.

a. Projectors have two points of connection: Face plate at computer, Faceplate at

projector.

•

VGA cables transfer video only. Wall plate at computer (VGA w/ audio) will likely have an audio

connection and will need an audio cable to transfer sound to the projector.

•

USB cable allows interactive function of pens. USB cable must be connected at wall face plate at

computer and projector. (Interactive Tools Driver should/must be downloaded to the user

computer via Software Center.

a. Interactive Pen Calibration: Epson Interactive Pens will occasionally need to be

calibrated. On the 450 and 455 projectors, the use must access the calibration menu

from the Epson Interactive Driver installed on the computer. Without this driver, the

pens will not be able to be calibrated so make sure the driver is installed.

i. Ensure pens have good batteries.

ii. Locate Interactive Driver Icon (Lower right corner of computer screen.

iii. Select "Calibrate (Normal).

iv. Tap the pen on each dot.

v. Continue until all dots are black.

Projector Connections

Epson BrightLink 450/455

Epson 450/455

Drivers)