Cisco 6941 - Unified IP Phone Slimline VoIP Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Telefone IP Cisco 6941 - Unified IP Phone Slimline VoIP. Cisco 6941 - Unified IP Phone Slimline VoIP 24 páginas. Two-line ip endpoint supporting both video and light-to-moderate voice communications
Também para Cisco 6941 - Unified IP Phone Slimline VoIP: Ficha de dados (5 páginas), Notas de lançamento (18 páginas), Ficha de dados (5 páginas), Manual do utilizador (38 páginas), Manual de Administração (14 páginas), Manual de configuração (16 páginas), Características (29 páginas), Manual de referência rápida (2 páginas), Manual de início rápido (2 páginas), Manual de referência (4 páginas), Cartão de referência rápida (2 páginas), Manual de Administração (19 páginas), Manual de utilização (7 páginas), Manual de referência rápida (2 páginas), Manual de início rápido (4 páginas)

To place a call on hold while on the call:

• To put a call on hold, press the Hold

To retrieve a held call:

• To resume the call, press the Resume soft key or the flashing green line button.

• If your phone supports multiple lines, you can use line buttons to swap between holding and active calls.

For example, if you have a holding call on Line 1 and an active call on Line 2, pressing the Line 1 button makes the Line 1

call active (resumes it from hold) and automatically puts the Line 2 call on hold.

Manage Call Waiting

If you are on a call when a second call comes in, you hear a call-waiting tone or see a flashing indicator light on the handset

rest, depending on the configuration of your phone.

To answer the new call on the same line:

1. Use the Swap soft key to toggle between the two calls or press the line button to go to the other call.

2. Press the Answer soft key to answer the call. The call on the other line is automatically put on hold.

For example, if you have a holding call on Line 1 and an active call on Line 2, pressing the Line 1 button makes the Line 1 call

active (resumes it from hold) and automatically puts the Line 2 call on hold.

To return to the original call:

1. Use the Swap soft key to reselect the call.

2. Press the Resume soft key to reconnect to the call.

Unanswered calls are routed to your voicemail system (if available).

Note

Mute a Call

To mute a call:

• While on a call, press the Mute button

To deactivate the mute function, do one of the following:

• Press the Mute button again.

• Lift the handset if you are using mute with your speakerphone.

The Mute feature does not generate music or a tone.

Note

Press the Messages button

Check for voice messages in any of these ways:

• Look at the visual message indicator lamp on your handset.

You can configure the visual message indicator lamp using your User Options web pages.

• Look for:

(For Cisco Unified IP Phones 6941 only.)

–

(For Cisco Unified IP Phones 6921 and 6941 only.) A text message.

–

button.

. The Mute button lights, indicating that the other party cannot hear you.

, then follow the voice prompts.

message waiting icon.