Cisco 6941 - Unified IP Phone Slimline VoIP Manual de Administração - Página 3

Procurar online ou descarregar pdf Manual de Administração para Telefone IP Cisco 6941 - Unified IP Phone Slimline VoIP. Cisco 6941 - Unified IP Phone Slimline VoIP 19 páginas. Two-line ip endpoint supporting both video and light-to-moderate voice communications
Também para Cisco 6941 - Unified IP Phone Slimline VoIP: Ficha de dados (5 páginas), Notas de lançamento (18 páginas), Ficha de dados (5 páginas), Manual do utilizador (38 páginas), Manual de Administração (14 páginas), Manual de configuração (16 páginas), Características (29 páginas), Manual do utilizador (24 páginas), Manual de referência rápida (2 páginas), Manual de início rápido (2 páginas), Manual de referência (4 páginas), Cartão de referência rápida (2 páginas), Manual de utilização (7 páginas), Manual de referência rápida (2 páginas), Manual de início rápido (4 páginas)

Cisco Unified IP Phone Settings

Password Protection

You can apply a password to the phone so that no changes can be made to the administrative options on the

phone without password entry on the Administrator Settings phone screen.

To apply a password to the phone, perform these steps:

Procedure

Step 1

In Cisco Unified Communications Manager Administration, navigate to the Common Phone Profile

Configuration window using Device > Device Settings > Common Phone Profile.

Step 2

Enter a password in the Local Phone Unlock Password option.

Step 3

Apply the password to the common phone profile that the phone uses.

Edit Values

When you edit the value of an option setting, follow these guidelines:

• Use the keys on the keypad to enter numbers and letters.

• To enter letters by using the keypad, use a corresponding number key. Press the key one or more times

• To enter a period (for example, in an IP address), press * on the keypad.

• Press the up arrow on the navigation bar to move the cursor to the left most character, and press the

• Press

• Press Cancel before pressing Save to discard any changes that you have made.

The Cisco Unified IP Phone provides several methods you can use to reset or restore option settings, if

Note

necessary. For more information, see the

The Network Setup menu provides options for viewing and making a variety of network settings. The following

table describes these options and, where applicable, explains how to change them.

to display a particular letter. For example, press 2 once for "a," twice quickly for "b," and three times

quickly for "c." After you pause, the cursor automatically advances to allow you to enter the next letter.

down arrow on the navigation bar to move the cursor to the right most character.

if you make a mistake. This softkey deletes the character to the left of the cursor.

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager

Cisco Unified IP Phone Reset or

Password Protection

Restore.

10.0 (SCCP and SIP)