Epson 7800p - PowerLite XGA LCD Projector Manual de informações do produto - Página 19

Procurar online ou descarregar pdf Manual de informações do produto para Projetor Epson 7800p - PowerLite XGA LCD Projector. Epson 7800p - PowerLite XGA LCD Projector 22 páginas. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Também para Epson 7800p - PowerLite XGA LCD Projector: Manual do utilizador (42 páginas), Manual de operação (36 páginas), Configuração rápida (2 páginas), Peças de substituição (1 páginas), Manual de operação (47 páginas), Manual de instalação (5 páginas), Ficha de especificações (2 páginas), Resumo técnico (7 páginas), Boletim de apoio ao produto (25 páginas), Boletim de apoio ao produto (22 páginas), Boletim de apoio ao produto (28 páginas), Boletim de apoio ao produto (41 páginas), Boletim de apoio ao produto (15 páginas), Boletim de apoio ao produto (22 páginas)

Imprimir página
Epson 7800p - PowerLite XGA LCD Projector Manual de informações do produto
EPSON PowerLite 7800p Projector

Projector Status Lights

Lamp light
Power light
The lights on top of the projector indicate the projector's
status and let you know when a problem occurs.
Key:
= on
Light
Description and solution
If no lights are on, make sure the power
cord is connected securely both at the
power outlet and the projector. If you have
just replaced the lamp, make sure the cover
is securely fastened
Orange
When the
projector is in sleep mode. Press the Power
button to turn it on.
Green
When the
the projector is warming up. Wait for the
image to appear.
Green
When the
projector is operating normally.
Orange
When the
the projector is cooling down. Do not
unplug it until the light stops flashing and
remains orange. If you want to turn it back
on, wait until the light stops flashing.
18
EPSON PowerLite 7800p Projector
-
Temperature light
= flashing
= off
.
P
power light is orange, the
P
power light is flashing green,
P
power light is green, the
P
power light is flashing orange,
Light
Red
Orange
Red
Red
Red
Red
Green
Orange
Red
Red
Red
Red
Red
5/03
Description and solution
When the power and temperature lights
are flashing, the projector is getting too hot
and is in rapid cooling mode. You can
continue running it in this condition,
however, verify that the air filter is not
clogged. Clean or replace it as described on
page 19.
Make sure the room temperature is not
above 95 F (35 C) and there is plenty of
space around and under the projector for
ventilation.
When the power and temperature lights
are red, the projector has overheated,
which turns off the lamp automatically.
Wait about 5 minutes for the projector to
cool, then unplug the power cord.
Verify that the air filter is not clogged.
Clean or replace it as described on page 19.
Make sure the room temperature is not
above 95 °F (35 °C) and there is plenty of
space around and under the projector for
ventilation. Then plug the power cord back
P
in and press the
Power button.
If the projector continues to overheat,
contact EPSON for help.
P
When the
power light is red and the
temperature light is flashing red, there is a
problem with a fan or temperature sensor.
Unplug the power cord and contact EPSON
for help.
When the
P
power light is green and the
lamp light is flashing orange, the lamp has
been used for at least 1900 hours. To
ensure continued operation, you should
replace it as soon as possible (see
page 19).
When the
P
power light is red and the
lamp light is flashing red, the lamp has
burned out. Replace it as described on
page 19.
If these lights come on after replacing the
lamp, make sure the lamp is fully inserted
and the lamp cover is attached.
If all three lights are red, the projector has
an internal problem. Unplug the power
cord and contact EPSON for help.