Siemens TRI-S Instruções de instalação
Procurar online ou descarregar pdf Instruções de instalação para Unidade de controlo Siemens TRI-S. Siemens TRI-S 4 páginas. Fire safety, addressable interface modules
Installation Instructions
Models TRI-S, TRI-D, TRI-R
Addressable Interface Modules
The SIEMENS Model TRI Series Addressable modules,
shown in Figure 1, interface direct shorting devices to the
MXL System's ALD loop circuit.
Note: The TRI-S/-D/-R Series is not compatible with
the XL3 System or the XLD-1 loop circuit.
The TRI modules are available in three models. The
TRI-S and TRI-R can monitor a normally open or closed
dry contact. The TRI-S model can only monitor and
report the status of the contact, while the TRI-R incor-
porates an addressable Form C relay. The TRI-D is a
dual input module that supervises and monitors two
sets of dry contacts. It requires two address settings.
The TRI has a multi-color LED that flashes green when
operating normally, amber if the unit is in trouble
condition, and red to indicate a change of state. The
TRI-D flashes twice, once for each address. The TRI-R
red LED indicates a change of state in the relay.
PROGRAMMING INSTRUCTIONS
1. Refer to Figure 2 to locate the openings on the TRI
cover that allow access to the programming holes
which are on the TRI printed circuit board.
2. To connect the TRI to the SIEMENS FPI-32
Programmer/Tester, insert the plug from the FPI-32
cable provided with the Programmer/Tester into the
opening on the front of the TRI. Be sure to insert
the locating tab on the plug into the slot for the
locating tab on the TRI as shown in Figure 2.
CAUTION: TO PREVENT DAMAGE TO THE FPI-32,
DO NOT connect a TRI to the FPI-32 until
at least one wire is removed from terminals
1 or 2 of the TRI.
Note: Connection from the FPI-32 to the TRI is keyed.
Refer to Figures 5-8 for the proper connections to
the control panel.
Siemens Building Technologies, Inc.
8 Fernwood Road
Florham Park, New Jersey 07932
P/N 315-096242-5
Figure 1
TRI Module
Figure 2
Inserting the FPI-32 Cable in the TRI Module
Siemens Building Technologies, Ltd.
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 CN
Fire Safety