Epson 821p - PowerLite XGA LCD Projector Informações sobre o produto - Página 11

Procurar online ou descarregar pdf Informações sobre o produto para Projetor Epson 821p - PowerLite XGA LCD Projector. Epson 821p - PowerLite XGA LCD Projector 15 páginas. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Também para Epson 821p - PowerLite XGA LCD Projector: Manual do utilizador (42 páginas), Especificações (2 páginas), Manual de operação (47 páginas), Lista de peças (1 páginas), Configuração rápida (2 páginas), Manual do utilizador (1 páginas), Boletim de apoio ao produto (25 páginas), Boletim de apoio ao produto (8 páginas), Boletim de apoio ao produto (22 páginas), Boletim de apoio ao produto (28 páginas), Boletim de apoio ao produto (41 páginas), Boletim de apoio ao produto (15 páginas), Boletim de apoio ao produto (22 páginas)

Imprimir página

Power

Lamp

Temp

light

Red

Flashing

Off

red

—

Flashing

Off

orange

Red

Flashing

red

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.

❏ Use a canister of compressed air to remove dust.

❏ To remove dirt or smears on the lens, use lens-cleaning

paper. If necessary, moisten a soft cloth with lens cleaner and

gently wipe the lens.

Caution:

Do not use glass cleaner to clean the lens.

Cleaning the Projector Case

Before you clean the case, first turn off the projector and unplug

the power cord.

❏ To remove dirt or dust, wipe the case with a soft, dry, lint-

free cloth.

❏ To remove stubborn dirt or stains, wipe the case with a soft

cloth moistened with a mild detergent.

Caution:

Do not use wax, alcohol, benzene, paint thinner, or other

chemical detergents. These can damage the case.

Description

The lamp is burned out, broken,

or not installed correctly, or the

lamp cover is open. Close the

cover or replace or reseat the

lamp.

Replace the lamp with a new

one as soon as possible. If you

continue to use the lamp, there

is a risk it might break.

There is an internal error.

Unplug the projector and

contact Epson.

Epson PowerLite 821p Projector

Cleaning and Replacing the Air Filter

Clean the air filter and air intake and exhaust vents on the

bottom and rear of the projector after every 100 hours of use.

If not cleaned periodically, they can become clogged with dust,

preventing proper ventilation. This can cause overheating and

damage the projector. When the filter is clogged, the projector

displays the message

To clean the air filter and air vents, follow these steps:

1. Turn off the projector, allow it to cool down, and unplug the

power cord.

2. Clean the air vent on the back of the projector.

Use a small vacuum cleaner designed for computers and

other office equipment. If you don't have one, use a very soft

brush (such as an artist's brush).

3. Turn the projector upside-down and clean the filter and air

intake vents on the base of the projector.

Air vent

If dirt is difficult to remove or the filter is torn, replace it.

The air filter set (part number V13H134A06) contains two

filters. Contact your dealer or call Epson at (800) 873-7766

to obtain a new set. In Canada, please call (800) 463-7766 to

locate a dealer.

Note:

When you get a replacement lamp for your projector, a new air

filter is included. Replace the filter when you replace the lamp.

9/04

The projector is overheated

Epson PowerLite 821p Projector

Air vent

Air filter