Siemens CM633GB 1B Series Manual do utilizador e instruções de instalação - Página 25

Procurar online ou descarregar pdf Manual do utilizador e instruções de instalação para Forno Siemens CM633GB 1B Series. Siemens CM633GB 1B Series 40 páginas.
Também para Siemens CM633GB 1B Series: Manual de instruções (48 páginas)

Imprimir página

Fault

Maximum operating

time reached.

A message with "D"

or "E" appears in the

display, e.g. D0111

or E0111.

The cooking result is

not satisfactory.

20 Disposal

20.1 Disposing of old appliance

Valuable raw materials can be reused by recycling.

Unplug the appliance from the mains.

Cut through the power cord.

Dispose of the appliance in an environmentally

friendly manner.

Information about current disposal methods are

available from your specialist dealer or local author-

ity.

21 Customer Service

Function-relevant genuine spare parts according to the

corresponding Ecodesign Order can be obtained from

Customer Service for a period of at least 10 years from

the date on which your appliance was placed on the

market within the European Economic Area.

Note: Under the terms of the manufacturer's warranty

the use of Customer Service is free of charge.

Detailed information on the warranty period and terms

of warranty in your country is available from our after-

sales service, your retailer or on our website.

If you contact Customer Service, you will require the

product number (E-Nr.) and the production number

(FD) of your appliance.

The contact details for Customer Service can be found

in the enclosed Customer Service directory or on our

website.

Cause and troubleshooting

To prevent an unwanted permanent operation, the appliance automatically stops heating

after several hours if the settings are unchanged. A message appears in the display.

The point at which the maximum operating time is reached is determined by the corres-

ponding settings for an operating mode.

To continue operation, switch off the appliance with

Then use

⁠ to switch on the appliance and set the required operation.

Tip: To prevent the appliance from switching off when you do not want it to, set a cooking

time.

The electronics have detected a fault.

Switch the appliance off and on again.

a If the fault was a one-off, the message disappears.

If the message appears again, call the after-sales service. Please specify the exact error

message when calling.

→ "Customer Service", Page 25

Settings were unsuitable.

Setting values, e.g. temperature or cooking time, depend on the recipe, quantity and food.

▶

Next time, set lower or higher values.

Tip: A lot of information about the food preparation and corresponding setting values

can be found on our website www.siemens-home.bsh-group.com .

⁠ first.

This appliance is labelled in accord-

ance with European Directive

2012/19/EU concerning used elec-

trical and electronic appliances

(waste electrical and electronic equip-

ment - WEEE).

The guideline determines the frame-

work for the return and recycling of

used appliances as applicable

throughout the EU.

This product contains light sources from energy effi-

ciency class G. These light sources are available as a

spare part and should only be replaced by trained spe-

cialist staff.

21.1 Product number (E-Nr.) and production

number (FD)

You can find the product number (E-Nr.) and the pro-

duction number (FD) on the appliance's rating plate.

You will see the rating plate with these numbers if you

open the appliance door.

Make a note of your appliance's details and the Cus-

tomer Service telephone number to find them again

quickly.

Disposal en