Siemens CM656GB 1 Series Manual do utilizador e instruções de instalação - Página 8
Procurar online ou descarregar pdf Manual do utilizador e instruções de instalação para Forno Siemens CM656GB 1 Series. Siemens CM656GB 1 Series 44 páginas.
Também para Siemens CM656GB 1 Series: Manual do utilizador (44 páginas)
Imprimir páginaen Familiarising yourself with your appliance
4.2 Buttons
Use the buttons on the left- and right-hand side of the control panel to switch your device or the operating mode on
and off.
Button
Function
On/off
Menu
Information
Childproof lock
Time-setting options
Rapid heat-up
Start/stop
4.3 Rotary selector
Use the rotary selector to change the setting values
that are shown in the display.
If you have reached the minimum or maximum value
for setting values, e.g. the temperature, this value re-
mains in the display. If required, use the rotary selector
to turn the value back again.
For lists, e.g. the types of heating, the first value starts
again after the last value.
4.4 Display
The display shows the current setting values.
The value that you can change in the display is high-
lighted in colour.
Status bar
The status bar is at the top of the display.
The time and set time functions are shown in the status
bar.
Progress line
The line is shown in the display below the highlighted
value.
The progress line shows you how much the appliance
has already heated up or how much time has elapsed.
The line is filled from left to right.
The heating line does not appear when using the mi-
crowave.
Countdown
You can view the countdown time or the cooking time
for the previous operation in the top right in the status
bar.
If you have set a cooking time and the cooking time is
deleted, the countdown time takes over from the time
that has already elapsed from the cooking time. You
can therefore always check how long the operation has
already been running.
The heating line does not appear when using the mi-
crowave.
Temperature display
The heating-up control and the residual heat indicator
show you the temperature in the cooking compartment.
Due to thermal inertia, the temperature that is displayed
may differ slightly from the actual temperature inside
the cooking compartment. You can use the
to check the current temperature.
8
Use
Switch the appliance on or off.
Open the operating mode menu
Display notifications Activate and deactivate the childproof lock
Activate and deactivate the childproof lock
Press briefly: Start or pause operation.
Press and hold for approx. three seconds: Cancel operation.
Switch rapid heat-up on and off
Start, pause or cancel the operation
¡ Heating-up control
¡ Residual heat indicator
4.5 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.
Shelf supports
The rails in the cooking compartment enable you to
place accessories at different heights.
→ "Accessories", Page 11
Your appliance has three shelf positions. The shelf pos-
itions are numbered from bottom to top.
You can remove the rails, e.g. for cleaning.
→ "Rails", Page 25
Self-cleaning surfaces
The self-cleaning surfaces in the cooking compartment
are coated with a porous, matt ceramic layer and have
a rough surface. When the appliance is in operation,
the self-cleaning surfaces absorb splashes from roast-
button
ing or grilling and break them down.
After the operation starts, the heating-up indicator
displays the rising temperature in the cooking com-
partment. When you are preheating the appliance,
the optimal time to place your food in the cooking
compartment is as soon as all the bars are filled.
For set levels, e.g. for grill settings, the heating-up
indicator is not displayed.
When the appliance is switched off, the display
shows the residual heat in the cooking compart-
ment. The residual heat indicator goes out at ap-
prox. 60 °C.