Siemens CM676G0.6 Manual do utilizador e instruções de instalação - Página 15
Procurar online ou descarregar pdf Manual do utilizador e instruções de instalação para Forno Siemens CM676G0.6. Siemens CM676G0.6 48 páginas.
9 Rapid heating
To save time, you can shorten the preheating time for
set temperatures of 100 °C and higher.
You can use rapid heating for this type of heating:
¡ 4D hot air
¡ Top/bottom heating
9.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note: Do not set a cooking time until rapid heating has
come to an end.
10 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
10.1 Overview of the time-setting options
You can set a cooking time and an operation end time
on the appliance. The timer runs independently of the
appliance during the operation.
Time-setting
Use
option
Timer
You can set the timer to run inde-
pendently of the appliance during op-
eration. It does not affect the appli-
ance.
Cooking time
If you set a cooking time, the appli-
ance will stop heating automatically
once this time has elapsed.
End time
Along with the cooking time (dura-
tion), you can set the time at which
you want cooking to end. The appli-
ance starts up automatically so that it
finishes cooking at the required time.
10.2 Setting the timer
The timer runs independently during the operation. The
timer can be set when the appliance is switched on or
off, up to 24 hours. The timer has its own audible sig-
nal so that you can tell whether it is the timer or a
cooking time that has elapsed.
1.
Press
.
a The field for the timer opens.
2.
Use the rotary selector to set the timer duration.
a The timer starts automatically after a few seconds.
a The
symbol and the time counting down are dis-
played on the left in the status bar.
a The timer counts down.
a When the timer duration has elapsed, a note ap-
pears on the display and an audible signal sounds.
3.
Once the timer duration has elapsed:
Press
to silence the audible signal manually.
‒
1.
Set a suitable type of heating and a temperature of
at least 100 °C.
2.
Press
.
a The
symbol appears on the left of the display
next to the temperature.
a The progress line begins to fill up.
3.
a When rapid heating has come to an end, a signal
tone sounds. The
display.
4.
Place the food in the cooking compartment.
Cancelling rapid heating
▶
Press
.
a The
symbol disappears from the display.
To set another timer, press
‒
selector to set the duration.
Changing the timer
You can change the timer duration at any time.
1.
Press
.
2.
Use the rotary selector to change the timer duration.
3.
Press
to confirm.
Cancelling the timer
You can cancel the timer duration at any time.
1.
Press
.
2.
Use the rotary selector to reset the timer duration to
zero.
3.
Press
to confirm.
10.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirement: The type of heating and a temperature
or setting have been set.
1.
Press
.
a The time-setting options menu opens.
2.
Use the rotary selector to set the cooking time.
Rotation direction
Left
Right
The cooking time can be set in one-minute incre-
ments up to one hour, and then in five-minute incre-
ments. The end time is calculated automatically.
3.
Press
to start the operation.
a The appliance starts to heat and the time starts to
count down.
a Once the cooking time has elapsed, an audible sig-
nal sounds. "Finished" appears in the status bar.
4.
Once the cooking time has elapsed:
Press
to silence the audible signal manually.
‒
To set another cooking time, press
‒
the rotary selector to set the cooking time.
Rapid heating en
symbol disappears from the
and use the rotary
Default value
10 minutes
30 minutes
and use
15