Siemens CM678G4.6B Manual do utilizador e instruções de instalação - Página 15
Procurar online ou descarregar pdf Manual do utilizador e instruções de instalação para Forno Siemens CM678G4.6B. Siemens CM678G4.6B 48 páginas.
Imprimir página
10 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
10.1 Overview of the time-setting options
You can set a cooking time and an operation end time
on the appliance. The timer runs independently of the
appliance during the operation.
Time-setting
Use
option
Timer
You can set the timer to run inde-
pendently of the appliance during op-
eration. It does not affect the appli-
ance.
Cooking time
If you set a cooking time, the appli-
ance will stop heating automatically
once this time has elapsed.
End time
Along with the cooking time (dura-
tion), you can set the time at which
you want cooking to end. The appli-
ance starts up automatically so that it
finishes cooking at the required time.
10.2 Setting the timer
The timer runs independently during the operation. The
timer can be set when the appliance is switched on or
off, up to 24 hours. The timer has its own audible sig-
nal so that you can tell whether it is the timer or a
cooking time that has elapsed.
Press
.
1.
a The field for the timer opens.
Use the rotary selector to set the timer duration.
2.
a The timer starts automatically after a few seconds.
a The
symbol and the time counting down are dis-
played on the left in the status bar.
a The timer counts down.
a When the timer duration has elapsed, a note ap-
pears on the display and an audible signal sounds.
3.
Once the timer duration has elapsed:
Press
to silence the audible signal manually.
‒
To set another timer, press
‒
selector to set the duration.
Changing the timer
You can change the timer duration at any time.
1.
Press
.
Use the rotary selector to change the timer duration.
2.
Press
to confirm.
3.
Cancelling the timer
You can cancel the timer duration at any time.
Press
.
1.
Use the rotary selector to reset the timer duration to
2.
zero.
Press
to confirm.
3.
and use the rotary
10.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirement: The type of heating and a temperature
or setting have been set.
Press
.
1.
a The time-setting options menu opens.
Use the rotary selector to set the cooking time.
2.
Rotation direction
Left
Right
The cooking time can be set in one-minute incre-
ments up to one hour, and then in five-minute incre-
ments. The end time is calculated automatically.
Press
to start the operation.
3.
a The appliance starts to heat and the time starts to
count down.
a Once the cooking time has elapsed, an audible sig-
nal sounds. "Finished" appears in the status bar.
Once the cooking time has elapsed:
4.
Press
to silence the audible signal manually.
‒
To set another cooking time, press
‒
the rotary selector to set the cooking time.
To continue without setting a cooking time, press
‒
.
When the food is ready, press
‒
appliance off.
Changing the cooking time
You can change the cooking time at any time.
Press
.
1.
Use the rotary selector to change the cooking time.
2.
Then press
twice.
3.
Cancelling the cooking time
You can cancel the cooking operation time at any time.
Press
.
1.
Use the rotary selector to reset the cooking time to
2.
zero.
To continue without setting a cooking time, press
3.
‒
.
The type of heating and temperature settings are
shown in the display.
10.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve good cooking results, do not
delay the end time once the appliance is operating.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ The type of heating and a temperature or setting
have been set.
¡ A cooking time is set.
Press
.
1.
Press
.
2.
Time-setting options en
Default value
10 minutes
30 minutes
and use
to switch the
15