Siemens HB.78.B series Manual de instruções - Página 18

Procurar online ou descarregar pdf Manual de instruções para Forno Siemens HB.78.B series. Siemens HB.78.B series 44 páginas.

Imprimir página

Sabbath mode

en

Changing the basic settings

The function selector must be set to the "Off" position.
Press and hold the v button for approximately
1.
4 seconds.
The first basic setting will appear on the display,
e.g. ™‹‚ ‚.
Turn the temperature selector to change the setting
2.
as required.
Use the @ button to navigate to the next basic
3.
setting.
Using the A or @ button, continue going through all
4.
the basic settings as described above, changing the
settings if necessary using the temperature selector.
When you have finished, press and hold the
5.
v button again for approximately 4 seconds to
confirm the settings.
All basic settings have now been applied.
You can change the basic settings again at any time.
Your changes to the basic settings will be
Note:
retained even after a power failure.
18
FSabbath mode
S abbath mode lets you set a cooking time of over 70
S a b b a t h m o d e
hours. This enables you to keep dishes in the cooking
compartment warm without having to switch the
appliance on or off.

Starting Sabbath mode

Before you can use Sabbath mode, you will need to
activate it in the basic settings. ~ "Basic settings"
on page 17
The appliance heats up with top/bottom heating. You
can set a temperature between 85 °C and 140 °C. The
cooking time can be adjusted to the nearest half hour
between 24 and 72 hours.
Set the function selector to the X programme.
1.
†'›› appears on the display.
Use the temperature selector to set the temperature.
2.
Touch the v button twice.
3.
The cooking time x will be highlighted on the
display.
Use the @ or A button to set the cooking time.
4.
The end time cannot be delayed.
Note:
The appliance will start heating after a few seconds. The
remaining time will count down on the display.
When the cooking time for Sabbath mode has ended,
an audible signal will sound. The appliance will stop
heating. The time on the display will be zero.
Switch the appliance off by turning the function selector
to the "Off" position.
Changing and cancelling
The settings cannot be changed once the appliance
has started.
If you would like to cancel Sabbath mode, switch the
appliance off by turning the function selector to the "Off"
position.