Cisco 7921G - Unified Wireless IP Phone VoIP Manual de acessórios - Página 4

Procurar online ou descarregar pdf Manual de acessórios para Telefone IP Cisco 7921G - Unified Wireless IP Phone VoIP. Cisco 7921G - Unified Wireless IP Phone VoIP 16 páginas. Unified wireless ip phone
Também para Cisco 7921G - Unified Wireless IP Phone VoIP: Ficha de dados (9 páginas), Notas de lançamento (16 páginas), Manual rápido (10 páginas)

Imprimir página

Cisco 7921G - Unified Wireless IP Phone VoIP Manual de acessórios

Desktop Charger with Speakerphone

You can use the desktop charger, as shown in

phone and a spare battery at the same time. In addition, the desktop charger is a speakerphone when the

phone is docked in the charger.

To use the desktop charger, see

Procedure

Step 1

Plug the power supply with AC plug adapter into a wall outlet.

Insert the connector plug into the back of the desktop charger.

Step 2

The power LED on the desktop charger is green.

Step 3

Place the Cisco Unified Wireless IP Phone 7921G in the upper compartment of the charger and look for

the "AC connected!" message on the phone screen.

The phone starts charging.

Press down on the top of the phone and look for the "Docking connected!" message on the phone screen

Step 4

and the docked icon in the phone status line. The phone is connected to the desktop charger speaker and

microphone for speakerphone operation.

Optional—You can also insert a spare battery into the lower slot. The battery LED is red while charging

Step 5

the battery and turns green when the battery is fully charged.

Note

While charging the Cisco Unified Wireless IP Phone 7921G, you can use the Cisco Unified Wireless IP

Phone 7921G web pages to import or export settings. You must connect the desktop charger to your

computer with the standard USB A-type to B-type cable. For more information, see

section on page

To remove the phone from the desktop charger, tilt the phone forward about 30 degrees, then remove it

from the compartment. Proper removal insures that the connectors will work reliably.

Note

If you have a desktop charger, you do not need a phone power supply to charge your phone.

Cisco Unified Wireless IP Phone 7921G Accessory Guide

Figure 2

You can insert and charge both the phone and a spare battery at the same time, or you can insert

and charge them separately.

13.

Figure

2, to charge both the phone battery installed in the

and follow these steps:

"USB Cables"

OL-11926-02