Cisco 7940G Manual do utilizador - Página 14

Procurar online ou descarregar pdf Manual do utilizador para Telefone IP Cisco 7940G. Cisco 7940G 15 páginas. Ios telephony services ip phone
Também para Cisco 7940G: Manual do utilizador (21 páginas), Manual do utilizador (25 páginas), Ficha de dados (7 páginas), Manual (35 páginas), Referência rápida (2 páginas), Manual de referência rápida (2 páginas), Manual do utilizador (20 páginas), Manual do telefone (17 páginas), Manual do Administrador (15 páginas), Manual do utilizador (16 páginas), Manual de referência (24 páginas), Manual de Administração (29 páginas), Manual (21 páginas), Manual de instalação (12 páginas), Manual do utilizador (10 páginas)

1. Press the up or down Volume button to hear sample rings and to adjust the

volume to the desired level. The ringer volume setting will be

automatically saved.

Changing the LCD Contrast

To improve the readability of the LCD screen, follow these steps to adjust the

contrast:

1. Press the Settings button.

2. Use the Navigation button to highlight Contrast and then the Select

softkey.

3. Press the Up or Down softkeys to adjust the contrast of your LCD screen.

4. Press the OK softkey and then the Save softkey.

5. To restore contrast settings, use the Navigation button to highlight

Contrast and perform one of the following:

To change the ringing sound on each of your lines:

1. Press the Settings button.

2. Use the Navigation button to select Ring Type and then the Select

softkey. You will see two different ring types on the LCD screen: default

ring and a ring type for each of your lines.

3. To select the ring type for the default tone, use the Navigation button to

highlight Default Ring and then the Select softkey.

4. Use the Navigation button to scroll through the list of ring types and press

the Play softkey to hear the selected ring.

5. Press the Select softkey and then the OK softkey to accept and save your

default ringer selection.

IP Phone 7940/60 User Manual

CCM 4.1

To restore a previously saved contrast setting, press the more softkey

and then the Restore softkey.

To restore the factory default contrast setting, press the more softkey

and then the Default softkey.

Page 14

Office of Enterprise Technology

April 13, 2009