Siemens SITRANS LVL100 Manual de Instruções - Página 12
Procurar online ou descarregar pdf Manual de Instruções para Interruptor Siemens SITRANS LVL100. Siemens SITRANS LVL100 33 páginas. Vibrating switches
Também para Siemens SITRANS LVL100: Manual de Instruções (32 páginas), Manual de Instruções (32 páginas), Manual de Instruções (32 páginas)
Imprimir página
Handling
Welded socket
Adhesive products
12
The vibrating level switch is a measuring instrument and must be
treated accordingly. Bending the vibrating element will destroy the
instrument.
Warning:
The housing must not be used to screw the instrument in! Applying
tightening force can damage internal parts of the housing.
Use the hexagon above the thread for screwing in.
4.2
Mounting instructions
For threaded versions of SITRANS LVL100 in combination with a
mounting boss with O-ring in front and welding marking.
SITRANS LVL100 with thread sizes ¾" and 1" have a defined thread
runout. This means that every SITRANS LVL100 is in the same posi-
tion after being screwed in. Remove therefore the supplied flat seal
from the thread of SITRANS LVL100. This flat seal is not required
when using a welded socket with front-flush seal.
Before welding, unscrew SITRANS LVL100 and remove the rubber
ring from the welded socket.
The welded socket is provided with a marking (notch). For horizontal
mounting, weld the socket with the notch facing upward or downward;
in pipelines (DN 25 to DN 50) aligned with the direction of flow.
Fig. 5: Marking on the welded socket
1
Marking
In case of horizontal mounting in adhesive and viscous products,
the surfaces of the tuning fork should be vertical in order to reduce
buildup on the tuning fork. The position of the tuning fork is indicated
by a marking on the hexagon of SITRANS LVL100. With this, you can
check the position of the tuning fork when screwing it in. When the
hexagon touches the seal, the thread can still be turned by approx.
half a turn. This is sufficient to reach the recommended installation
position.
In adhesive and viscous products, the surfaces of the tuning fork
should protrude into the vessel to avoid buildup. Therefore sockets for
flanges and mountings bosses should not exceed a certain length.
SITRANS LVL100 - Operating Instructions
1