Epson BrightLink 450Wi - Interactive Projector Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Projetor Epson BrightLink 450Wi - Interactive Projector. Epson BrightLink 450Wi - Interactive Projector 25 páginas. Remote control information
Também para Epson BrightLink 450Wi - Interactive Projector: Manual Iniciar aqui (6 páginas), Brochura e especificações (18 páginas), Instalação (5 páginas), Modelo de montagem (1 páginas), Desenho Dimensional (2 páginas), Modelo de montagem (5 páginas), Manual de início rápido (2 páginas), Utilizar (4 páginas), Brochura e especificações (18 páginas), Manual de instalação (10 páginas)

ESC/VP21 Command User's Guide for Business Projectors

5. Command transmission timing

5.1. Standby state

1). For all mode with the standby configuration of "network on"

The first command can be sent anytime and the subsequent commands should be sent after receiving a colon from the

projector.

2). Other than 1)

PWR ON can be sent any time.

5.2. Power on state

A command should be sent after receiving the colon of the previous command from the projector. The following is an

exception. When the PWR OFF command is sent to 7800/7850/8300/9300 with the standby configuration of "network off",

the subsequent command should be sent 10 seconds after the colon is received.

In case that you can not wait for the colon and send a command after receiving it, instead send a command after the

execution time listed in the following table.