Siemens SF 25M855 Manual de Instruções - Página 15

Procurar online ou descarregar pdf Manual de Instruções para Máquina de lavar loiça Siemens SF 25M855. Siemens SF 25M855 28 páginas.

Imprimir página

Additional options

* depending on model

Additional options can be set with the

buttons @.

Express Wash/ Speed

Perfect *

The >>Express Wash/ Speed Perfect<<

function can reduce the running time by

approx. 20% to 50% depending on the

selected rinse programme. The change in

the running time is indicated on the digital

display `. To obtain optimum cleaning

results at a reduced running time, water

and energy consumption are increased.

Half load *

If you have only a few items to wash (e.g.

glasses, cups, plates), you can switch to

"half load". This will save water, energy

and time. It is recommended to put a little

less detergent in the detergent dispenser

than for a full load.

–

Timer programming *

You can delay

the start of the programme in 1 hour steps

up to 19 hours.

– Switch on the main switch (.

– Press the timer programming button

until the digital display ` jumps

– Keep pressing the timer programming

button until the required time

is displayed.

– To delete the preselected starting time,

press the button until

is indicated on the digital display `.

You can change your programme

selection at any time until

the programme starts.

Washing the dishes

Programme data

The programme data (consumption

values) can be found in the summary

of instructions. They refer to normal

conditions and the water hardness set

value . Different influencing factors such

as water temperature or line pressure may

result in deviations.

Aqua sensor *

* depending on model

The Aqua sensor is an optical measuring

device (light barrier) which measures the

turbidity of the rinsing water.

The Aqua sensor is used according to the

programme. If the Aqua sensor is active,

"clean" rinsing water can be transferred to

the next rinse bath and water consumption

can be reduced by 2–4 litres. If the

turbidity is greater, the water is drained

and is replaced with fresh water. In the

automatic programmes the temperature

and running time can also be adjusted to

the degree of soiling.

Switching on the appliance

– Turn on the tap fully.

– Close the door.

– Rotate programme selector 8

to the required programme.

– Switch on the main switch (.

The expected programme duration

is indicated on the numerical

display `.

– The programme starts running.

Remaining running time display

When the programme is selected, the

remaining running time of the programme

is indicated on the digital display `.

The running time is determined during the

programme by the water temperature, the

number of utensils as well as the degree

of soiling and may vary (depending on the

selected programme).