Epson BrightLink 475Wi Manual de ligação - Página 4

Procurar online ou descarregar pdf Manual de ligação para Projetor Epson BrightLink 475Wi. Epson BrightLink 475Wi 6 páginas. Lamp and status information
Também para Epson BrightLink 475Wi: Manual Iniciar aqui (6 páginas), Manual de operação (47 páginas), Manual de instalação (5 páginas), Modelo de montagem (5 páginas), Especificações (6 páginas), Declaração de Conformidade (4 páginas), Desenho Dimensional (3 páginas), Especificações (6 páginas), Manual de instalação (3 páginas), Manual de instalação (2 páginas), Manual de instalação (5 páginas), Manual de início rápido (6 páginas), Manual Iniciar aqui (6 páginas)

Connecting Document Cameras

Document cameras have several different types of ports for connecting to the projector.

For cameras that have USB ports, such as the EPSON DC-11 and EPSON DC-06, the best

way to connect is directly to the computer's USB port, as shown below. This will enable full

interactivity and dual pen support (using Easy Interactive Tools software) on the document

camera image.

To projector

Although you can connect the EPSON DC-06 directly to the projector's

port using a

USB-A

USB cable, this will provide only limited interactivity (using the built-in interactive toolbar).

For document cameras that do not have a USB port, you can connect to the projector's VGA

(

) or

port. This will allow use of the projector's built-in interactive toolbar

Computer2

HDMI

on the camera image.

If the document camera has USB and VGA connectors, you can connect a USB cable from

the camera to the computer and a VGA cable directly to the projector. This will provide two

ways of connecting. The USB connection can be used when the computer is on, and the VGA

connection can be used when the teacher wants to work with the document camera without

turning on the computer.

You can use a switch box or control box to connect various video inputs to the projector.

However, the primary computer should always be connected directly to the projector with a

USB cable for interactivity and another cable for video output (VGA, HDMI, or Ethernet).

This allows maximum interactivity and dual pen support (using Easy Interactive Tools

software) for the computer. The projector's built-in toolbar will be available for images from

equipment connected through the switch box.