Siemens EH....FE.. Manual de instruções - Página 12

Procurar online ou descarregar pdf Manual de instruções para Hob Siemens EH....FE... Siemens EH....FE.. 20 páginas.

Imprimir página

Time programming function

This function may be used in two different ways:

to automatically switch off a hotplate.

■

as a timer.

■

Turning off a hotplate automatically

The hotplate turns off automatically once the selected time has

elapsed.

Program the cooking time.

The hob must be switched on:

Select the desired hotplate and power level.

Press the

symbol. The

up.

‹‹

lights up in the time program function display.

Within the next 10 seconds, select the desired cooking time

in the programming zone. The possible default setting is,

from left to right: 1, 2, 3, etc., up to 10 minutes.

After a few seconds, the cooking time begins to elapse.

Note: The same cooking time can be automatically

programmed for the all the hotplates. The programmed time

passes independently for each of the hotplates.

The Basic settings chapter provides information on

automatically programming the cooking time.

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming zone, the cooking time is reduced by one minute.

If the previous setting from 6 to 10 is pressed in the

programming zone, the cooking time is increased by one

minute.

Cleaning lock function

Cleaning the control panel while the hob is switched on may

change the settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

‚

symbol. A signal sounds. The control panel is

locked for 35 seconds. The control panel surface can now be

cleaned without the risk of changing the settings.

Note. The lock does not affect the main switch. The hob may

be turned off when desired.

indicator on the hotplate lights

Changing or cancelling the time

Select the hotplate and then press the

Change the cooking time using the programming zone or set

in order to cancel the time.

‹‹

Automatically switch off a hotplate with the deep-frying

function

When cooking using the deep-frying function, the programmed

cooking time begins to count down once the selected zone

reaches the desired temperature.

Once the time has elapsed

The hotplate switches off. A warning signal sounds. The time

program function lights up

When the

symbol is pressed, the indications turn off and the

beeping stops.

Notes

If cooking times have been programmed for various

■

hotplates, the time programming function always displays the

time for the selected hotplate.

Any cooking time can be programmed for up to 99 minutes.

■

The kitchen timer

You can use the kitchen timer to set a time of up to 99 minutes.

This functions independently from the hotplates and from other

settings. This function does not automatically switch off a

hotplate.

Programming

Press the

symbol several times until the

up.

‹‹

lights up in the time program function display.

Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Changing or cancelling the time

Press the

symbol several times until the

up. Change the time with the programming zone, or set to

Once the time has elapsed

A warning signal sounds. In the time program function

display

is shown, and the

‹‹

10 seconds the indicators turn off.

When the

symbol is pressed, the indicators turn off and the

beeping stops.

symbol.

for 10 seconds in the display.

‹‹

indicator lights

indicator lights up. After

‹‹