Siemens EH6 MD2 Series Manual de instruções - Página 14
Procurar online ou descarregar pdf Manual de instruções para Hob Siemens EH6 MD2 Series. Siemens EH6 MD2 Series 16 páginas.
Também para Siemens EH6 MD2 Series: Manual de instruções (20 páginas)
Imprimir página
To access the basic settings
The hob must be turned off.
Turn on the hob with the main switch.
1.
Within the next 10 seconds, press the
2.
4 seconds.
is displayed on the left of the screen and
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Hob
Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cold enough
before attempting to clean it.
Only use cleaning products specifically designed for glass-
ceramic hobs. Follow the instructions provided on the
packaging.
Do not use:
Abrasive products
heavy-duty cleaners, like oven sprays and stain removers
Pads that may scratch
High-pressure or steam cleaners
Glass scraper
Remove dried-on food remains using a glass scraper.
Fixing malfunctions
Malfunctions are generally caused by minor faults. Before
contacting the Technical Assistance Service, make sure you
have read the following recommendations and warnings.
Indicator
Malfunction
none
The electric power supply has been
interrupted.
The appliance has not been correctly
connected following the connection
diagram.
Electronic system malfunction.
* If the warning persists call the Technical Assistance Service.
Do not place hot pans on the control panel.
14
EURO Appliances - euappliances.info
Press the
3.
desired function appears on the left of the screen.
Then select the required setting using the programming zone.
4.
symbol and hold for
Press the
5.
4 seconds.
The settings will have been correctly saved.
on the right.
Quit
To leave the basic settings, turn off the hob at the main switch.
Release the scraper safety catch
1.
Use the blade to clean the hob surface
2.
Do not attempt to clean the hob surface with the base of the
scraper. This could result in scratching.
ã=
The blade is extremely sharp. Risk of cuts. Protect the blade
when not in use. Replace the blade immediately when any
imperfections are found.
Care of the appliance
Apply an additive to protect and preserve the hob. Follow the
advice and warnings provided with the product.
Hob frame
In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
Do not use sharp or abrasive products
Do not use a glass scraper
Measure
Use other electrical appliances to check if there has been a power
cut.
Make sure that the appliance has been connected correctly.
If in the above checks, the malfunction is not resolved, contact the
Technical Assistance Service.
symbol several times until the indicator for the
symbol again and hold for more than
Risk of injury!!