Siemens EH8 Series Manual de instruções - Página 12
Procurar online ou descarregar pdf Manual de instruções para Hob Siemens EH8 Series. Siemens EH8 Series 20 páginas. Full surface induction cooktop
Também para Siemens EH8 Series: Manual de instruções (34 páginas), Manual de instruções (20 páginas)
Imprimir página
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■
Turning off a hotplate automatically
Enter the cooking time for the required hotplate. The hotplate
turns off automatically once the time has elapsed.
How to program
Select the required power level.
1.
Press the
0
symbol of the desired hotplate. The hotplate
2.
display shows
‹‹
and the indicator
Select the required cooking time in the programming panel.
3.
The possible previous setting is, from left to right 1, 2, 3, etc.,
up to 10 minutes. Within the next 10 seconds, continue
passing through the options in the programming panel until
reaching the desired time.
The cooking time will be displayed for 10 seconds then begin
to count down.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Automatic programming
If the previous setting from 1 to 5 is pressed in the
programming panel, the cooking time is reduced by one
minute, if it is held down the time is automatically reduced to
one minute.
If the previous setting from 6 to 10 is pressed in the
programming panel , the cooking time is increased by one
minute, if it is held down the time is automatically increased to
99 minutes.
Cleaning lock function
Cleaning the control panel while the hob is switched on may
change the settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
/
symbol. A signal sounds. The control panel is
‚
$
locked for 35 seconds. The control panel surface can now be
cleaned without the risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be turned off when desired.
12
x
comes on.
Changing or cancelling the time
Press the
symbol of the desired hotplate. Change the
0
cooking time in the programming panel, or set to
Once the time has elapsed
The hotplate switches off. The beep sounds and the display
comes on
for 10 seconds. The
‹‹
Pressing the
symbol turns off the indicators and stops the
0
beeping.
Automatically switch off a hotplate with the deep-frying
function
When cooking using the deep-frying function, the programmed
cooking time begins to count down once the selected hotplate
reaches the desired temperature.
Note: Any cooking time can be programmed up to 99 minutes.
Timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. The hob must be switched
on. The timer can be set for any hotplate not turned on. This
function does not automatically switch off a hotplate.
How to program
Press the symbol
for the hotplate, the indicator
0
1.
turned on.
lights up in the time program function display.
‹‹
Select the desired time in the programming panel.
2.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the
0
symbol of the desired hotplate. Change the
cooking time in the programming panel, or set to
Once the time has elapsed
A warning beep sounds. In the time program function display
‹‹
is shown, and the
W
indicator comes on. After 10 seconds
the indicators turn off.
Pressing the
symbol turns off the indicators and stops the
0
beep.
Note: When the timer is activated, the corresponding hotplate
is locked. First turn off the timer and then the hotplate.
.
‹‹
indicator lights up.
x
is
W
.
‹‹