Epson CPD-17904 Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Projetor Epson CPD-17904. Epson CPD-17904 48 páginas. Epson powerlite home 10 projector cpd-17904

Imprimir página

Using the Projector

Follow the instructions in this section to choose a location for the projector, adjust the image

and volume, turn off picture and sound, freeze the action, or use the projector menus.

Choosing a Location

The distance from the projector to the screen or wall determines the size of the picture. The

picture will be larger when you place the projector further from the screen. See the Quick

Setup sheet for details about the relationship between distance and picture size.

You can also choose from five different viewing setups. If you install the projector in a rear or

overhead position, you'll need to choose the correct Projection option (identified below) from

the projector's Setting menu.

Table: For temporary front projection, place the projector on a

low table in front of the screen. If possible, place the projector

directly in front of the screen, facing the screen squarely. The

base of the lens should be about level with the bottom of the

screen.

Shelf: You can also place the projector on a high shelf behind

you. Attach the three rubber feet that came with the projector

to the top of the projector, then place the projector

upside-down. After you turn on the projector, choose

for the Projection option in the Setting menu.

Front/Ceiling

Ceiling: You can purchase special equipment from Epson to

attach the projector to your ceiling (see page 12 for ordering

information). If you choose this setup, professional installation

is recommended. Choose

option.

for the Projection

Front/Ceiling

Table

Shelf

Ceiling