Epson CPD-17904 Manual do utilizador - Página 28

Procurar online ou descarregar pdf Manual do utilizador para Projetor Epson CPD-17904. Epson CPD-17904 48 páginas. Epson powerlite home 10 projector cpd-17904

Imprimir página

Replacing the Lamp

It's time to replace the lamp when:

The projection image gets darker or starts to deteriorate.

The projector's warning light flashes red at half second

intervals.

The message

when you start projecting.

Contact your dealer or call Epson at (800) 873-7766 in the United States for a replacement

lamp. Request part number

Be sure to read the "Important Safety Information" on page 5 before replacing the lamp.

Warning: Let the lamp cool before replacing it. If the lamp breaks, handle the shards

carefully to avoid injury. If your projector is mounted on the ceiling, take it down before

beginning this procedure.

The lamp component contains mercury. Please consult your state and local regulations

regarding proper disposal or recycling, and do not place in the trash.

Caution: Never touch the lamp with your bare hands; the invisible residue left by the oil on

your hands may shorten the lamp life. Use a cloth or gloves to handle the new lamp.

Note: Although an air filter is included with the lamp, you cannot use it with the projector. If

you need to replace the air filter, ask for part number V13H134A04 when you contact your

dealer or Epson. See page 27 for details on ordering.

Follow these steps to replace the lamp:

1. Turn off the projector and wait for the P power light to stop flashing.

2. Unplug the power cord and any cables.

3. If the projector has been on, let it cool for at least an hour.

4. Press in on the two tabs and lift the lamp cover up and off.

appears on the screen

Replace the lamp

V13H010L29

. In Canada, call (800) 463-7766 for dealer referral.