Cisco 8851 Características - Página 12

Imprimir página

Cisco Unified Communications Manager Accessibility Features

The following table provides information on the Cisco Unified Communications Manager (Cisco Unified

CM) accessibility features. For more information, see the user guide applicable to your phone.

Accessibility Feature

Programmable Line

Key (PLK)

Audible Message

Waiting Indicator

(AMWI)

Do Not Disturb (Alert

and Reject)

Accessibility Features for the Cisco IP Phone 8800 Series

Description

You can use the line buttons to initiate, answer,

or switch to a call on a particular line. A

limited number of features, such as speed dial,

extension mobility, privacy, Busy Lamp Field

(BLF) speed dial, Do Not Disturb (DND), and

Service URLs, get assigned to these buttons.

The PLK feature expands the features that can

be assigned to the line buttons to include those

that softkeys normally control; for example

New Call, Call Back, End Call, and Forward

All. When these features are configured on the

line buttons, they are always visible, so you

can have a "hard" New Call key.

You can access features easily that may be

assigned to softkeys normally, which can be

too small and difficult to use.

Cisco Unified IP Phones can send a

line-specific stutter dial tone when a voice

message is waiting on the phone. You hear it

only when using the line with the waiting

messages. When you go off hook (on the line

for which a voice message has been left), the

stutter dial tone is heard.

You can change the audible voice-message

indicator setting by logging in to your phone

support pages, and changing the audible

message-indicator setting to On or Off.

Your administrator configures the phone to

turn on all audible and visual notifications, turn

on ringer only, or to choose the type of alert a

phone should play for incoming calls.

Accessibility Features for the Cisco IP Phone 8800 Series

Configuration Requirements

Standard on all Cisco IP Phones;

configuration is required.

Your administrator assigns PLKs

to your phone.

Standard on all Cisco IP Phones.

Configuration is required:

• administrator

• phone support pages

Standard on all Cisco IP Phones;

configuration is required.