Set Up Phone from Setup Menus
See
Cable Specifications
Step 5
(Optional) Connect a straight-through Ethernet cable from another network device, such as a desktop computer,
to the access port labeled Computer on the Cisco Unified IP Phone 8941 and 8945.
You can connect another network device later if you do not connect one now.
You can use either Category 3, 5, or 5e cabling for 10Mbps connections, but you must use Category 5 or 5e
for 100 or 1000 Mbps connections.
See
Cable Specifications
Step 6
Monitor the phone startup process. This step adds primary and secondary directory numbers and features that
are associated with directory numbers to the phone, and verifies that the phone is configured properly.
For more information, see
Step 7
If you are configuring the Ethernet network settings on the phone for an IP network, you can set up an IP
address for the phone either by using DHCP or by manually entering an IP address.
For more information, see
Step 8
Make calls with the phone to verify that the phone and features work correctly.
See the Cisco Unified IP Phone 8941 and 8945 User Guide for Cisco Unified Communications Manager.
Step 9
Provide information to end users about how to use their phones and how to configure their phone options.
This step ensures that users have adequate information to successfully use their Cisco Unified IP Phones.
For more information, see
Step 10 Adjust the footstand. For more information, see
Set Up Phone from Setup Menus
You can control whether a phone has access to the Settings menu or to options on this menu by using the
Settings Access field in the Cisco Unified Communications Manager Administration Phone Configuration
window. The Settings Access field accepts these values:
Enabled
Disabled
Restricted
If you cannot access an option on the Administrator Settings menu, check the Settings Access field.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
4
for guidelines.
for guidelines.
Phone Startup Process, on page
Set Up Phone from Setup Menus, on page
Cisco IP Phone User
Allows access to the Settings menu.
Prevents access to the Settings menu.
Allows access to the User Preferences menu and allows volume changes to be saved. Prevents access
to other options on the Settings menu.
14.
4.
Support.
Connect
Footstand.
Cisco Unified IP Phone Installation
Imprimir página