Cisco Cisco Access Registrar 4.2 Configuração das definições de rede - Página 17
Procurar online ou descarregar pdf Configuração das definições de rede para Telefone IP Cisco Cisco Access Registrar 4.2. Cisco Cisco Access Registrar 4.2 34 páginas. Telepresence conference system
Também para Cisco Cisco Access Registrar 4.2: Manual do utilizador (44 páginas), Manual de iniciação (46 páginas)
Imprimir página
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
Using the Phone Network Configuration Screen
Step 1
Step 2
Step 3
Step 4
Step 5
Configuring IP Settings
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
Procedure
Display the Network Configuration menu.
For instructions, see the
on page
4-4.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to DHCP Address Released.
If the DHCP address is currently assigned, the option appears as
DHCP Address Released NO
Press the Yes softkey to release the DHCP-assigned IP address.
Press Save.
The phone remains in an idle state, without an IP address assigned, until you do
one of the following actions:
Manually assign an IP address.
•
Set DHCP Address Released back to No.
•
Power cycle the phone, which enables all default settings, including enabling
•
DHCP.
Related Topics
Enabling DHCP, page 4-13
•
Disabling DHCP, page 4-15
•
•
Configuring IP Settings, page 4-17
Use these guidelines when manually configuring the IP settings:
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-5.
Configuring IP Settings
4-17