Ricoh 4700WD Definições do sistema - Página 29

Procurar online ou descarregar pdf Definições do sistema para Impressora tudo em um Ricoh 4700WD. Ricoh 4700WD 42 páginas. Savin copier operating instructions

Imprimir página

Dol_Chapter-2 Page 17 Thursday, July 19, 2001 3:22 PM

❒ When Translucent Paper modes 1 or 2 are selected, and you change the pa-

per type from Plain or Film to Translucent Paper, it may take longer for the

machine to get ready for copying. (Up to two minutes).

❖ ❖ ❖ ❖ Bypass Tray Paper Type

Specifies the thickness for the paper in the bypass tray. If the image on copies

is scratched, or the paper wrinkles when using translucent paper, you can

change the setting to get better copies.

Select Plain, Translucent Paper, or Film.

Note

❒ For a guide to paper thickness, see the p.16 "Fusing Adjustment: Paper

Tray" chart. However, the results for hemmed paper cannot be guaranteed.

Note

❒ Default: 3

❒ The paper thickness can be set from 1 (Thicker) to 5 (Thinner).

❖ ❖ ❖ ❖ Original Size Detect

Specifies whether the scanning area when detecting the size of an original.

• Metric version

• A Series

• JIS B Series

• Inch version

• Engineering

• Architecture

Note

❒ Default:

• Metric version: A series

• Inch version: Engineering

❒ When you change the setting, the following changes are made to the User

Auto R/E Original Size Detect setting in User Tools (Copier Features).

❖ ❖ ❖ ❖ Metric version

• For A series→JIS-B series, if B1 is set for the User Auto Reduce/En-

large settings, the User Auto R/E Original Size Detect setting is

changed to vertical.

• B series→JIS-A series, if A0 is set for the User Auto Reduce/Enlarge

settings, the User Auto R/E Original Size Detect setting is changed to

vertical.

❖ ❖ ❖ ❖ Inch version

When switching Engineering ↔ Architecture, if E is set for the User

Auto Reduce/Enlarge settings, the User Auto R/E Original Size Detect

Setting is changed to vertical.

Settings You Can Change with the User Tools