Ricoh SP 1210N Manual de configuração rápida - Página 9
Procurar online ou descarregar pdf Manual de configuração rápida para Impressora Ricoh SP 1210N. Ricoh SP 1210N 28 páginas. Quick installation guide
Também para Ricoh SP 1210N: Manual de instalação rápida (2 páginas)
Imprimir página
Important Information for
New Zealand
Important Safety Instructions
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the
product.
4 Unplug this product from the wall outlet before
cleaning the outside of the machine and the
scanner glass. DO NOT use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
5 DO NOT place this product on an unstable
surface, stand, or table. The product may fall,
causing serious damage to the product.
6 Slots and openings in the casing and the back or
bottom are provided for ventilation; to ensure
reliable operation of the product and to protect it
from overheating, these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should never
be placed near or over a radiator or heater. This
product should not be placed in a built-in
installation unless proper ventilation is provided.
7 This product should be connected to an AC power
source within the range indicated on the rating
label. DO NOT connect it to a DC power source or
inverter. If you are not sure, contact a qualified
electrician.
8 This product is equipped with a 3-wire earthed
plug. This plug will fit into only an earthed socket.
This is a safety feature. If you are unable to insert
the plug into the outlet, contact your electrician to
replace your obsolete socket. DO NOT defeat the
purpose of an earthed plug.
9 DO NOT place anything on top of the power cord
including this machine. DO NOT allow the power
cord to be stepped on.
10 DO NOT touch a document during printing.
11 Never push objects of any kind into this product
through cabinet slots, since they may touch
dangerous voltage points or short out parts
resulting in a risk of fire or electric shock. Never
spill liquid of any kind on the product.
12 DO NOT attempt to service this product yourself,
because opening or removing covers may expose
you to dangerous voltage points and/or other risks.
Refer all servicing to service personnel.
13 Unplug this product from the mains power, and
refer servicing to qualified Service Personnel
under the following conditions:
If the power cord is damaged or frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or
water.
Safety Precautions
If the product does not operate normally when
the operating instructions are followed. Adjust
only those controls that are covered by the
operating instructions. Incorrect adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the product to normal
operation.
If the product has been dropped or the casing
has been damaged.
If the product exhibits a distinct change in
performance, indicating a need for service.
IMPORTANT-For Your Safety
To ensure safe operation the three-pin plug supplied
must be inserted only into a standard three-pin power
point which is effectively grounded through the
normal household wiring.
Extension cords used with the equipment must be
three-conductor and be correctly wired to provide
connection to ground. Incorrectly wired extension
cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily
does not imply that the power is grounded and that
the installation is completely safe. For your safety, if
in any doubt about the effective grounding of the
power, consult a qualified electrician.
7